OpenBCM V1.13 (Linux)

Packet Radio Mailbox

DB0FHN

[JN59NK Nuernberg]

 Login: GUEST





  
CX2SA  > SATDIG   11.07.05 08:25l 106 Lines 4011 Bytes #999 (0) @ WW
BID : 9451_CX2SA
Read: GUEST
Subj: AMSAT-BB-digest V2004 #786 2/4
Path: DB0FHN<DB0RGB<OK0PPL<DB0RES<DK0WUE<I0TVL<CX2SA
Sent: 050711/0718Z @:CX2SA.LAV.URY.SA #:9451 [Minas] FBB7.00e $:9451_CX2SA
From: CX2SA@CX2SA.LAV.URY.SA
To  : SATDIG@WW


Message: 3
Date: Sun, 10 Jul 2005 08:04:11 -0400
From: Daniel Schultz <n8fgv@usa.net>
Subject: [amsat-bb] Free 3D CAD software

An unnamed software company is offering to give away a 'light' version of
their 3D parametric solid modeler CAD software at no cost. You can obtain your
own legal copy by registering on their Web site at www.x-cad.net. Everyone who
registers will get the X-CAD product for FREE ƒ?" but only if 100,000 people
register by August 1, 2005. When 100,000 people register, each will receive
directions via e-mail to download the free software. They already have about
66,000 registered. This seems to be a legitimate offer based on the source I
got it from.

Dan Schultz N8FGV
- ----
Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
Not an AMSAT member? Join now to support the amateur satellite program!
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org

Message: 4
Date: Sun, 10 Jul 2005 23:02:37 +0900
From: "Mineo Wakita" <ei7m-wkt@asahi-net.or.jp>
Subject: [amsat-bb] AO-51 July 10

AO-51
Up:145.860, Down:435.150 MHz
9600bps

Jul 10, 11:16-11:30 UTC
> fm PACB-1 to TIME-1 ctl UI pid F0
> PHT: uptime is 007/10:19:32.  Time is Sun Jul 10 11:18:23 2005
>
> fm PECHO-11 to JE9PEL ctl UI pid BB
> OK JE9PEL
>
> fm PACB-1 to AMSATN-1 ctl UI pid F0
> 4 July...FM Repeater and PBBS OPEN...
> Software Upload in Complete...73 KE4AZN
>
> fm PECHO-11 to PBLIST ctl UI pid F0
> PB: JE9PEL

- ---------------------------------------------
Name: Mineo Wakita / JE9PEL, JAMSAT member
Mail: ei7m-wkt@asahi-net.or.jp
URL : http://www.ne.jp/asahi/hamradio/je9pel/
QTH : Yokohama Japan, GL:PM95TJ
Date: Jul 10, 2005
- ---------------------------------------------
- ----
Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
Not an AMSAT member? Join now to support the amateur satellite program!
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org

------------------------------

Message: 5
Date: Sun, 10 Jul 2005 09:59:09 -0400
From: "Luc Leblanc" <luclebla@sorel-tracy.qc.ca>
Subject: Re: [amsat-bb] rotor problems

Le 10 Jul 2005, … 3:12, Freeman Pascal a ‚crit:

> I have an Alphaspid az rotor that I purchased for my HF tower  
> project.  Since it was idle during field day I decided to use it with  
> my field day satellite setup.  After all the good things I heard and  
> read about the Alphaspid, I was horrified to discover that the wire  
> terminals used to connect the controller to the control cable were of  
> the flimsiest quality, the tabs were literally popping out  - Radio  
> Shack puts out better quality parts.  We literally had to tape the  
> control cable to the outside of the controller case with duct tape to  
> keep the cable in place and allow the terminals to make contact - ugh!
> 
> Please tell me that the terminals on your AZ/EL rotor controller were  
> of better quality.
> 
> 
> -Freeman, N5FPP

On my alpha spid i installed a 4 wire trailer connector and i tape the wire 
very thigt over entry tube where the wire are passing through. Dont forget 
to put silicon over the terminal box top but let the bottom free to allow 
moisture drainage.

Dont use too heavy wire gauge with the trailer connector wire size you will 
not get any problems. As many terminal connector they are not made to 
hold any charge and i prefer this system to my former tailtwister with the 
bottom terminal connector where you have to dismantel the rotor to acces 
the terminal. Alfa spid is making a very accessible terminal box but not 
strong to a point to be used as a guyed wire attachment point.:)

Your idea to tape the rotor cable is the solution that i used too to avoid 
any stress on the terminal post.


Luc VE2DWE in EL99MD
- ----
Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
Not an AMSAT member? Join now to support the amateur satellite program!
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org


Read previous mail | Read next mail


 17.11.2026 08:38:43lGo back Go up