OpenBCM V1.13 (Linux)

Packet Radio Mailbox

DB0FHN

[JN59NK Nuernberg]

 Login: GUEST





  
CX2SA  > SATDIG   04.07.05 08:30l 137 Lines 4206 Bytes #999 (0) @ WW
BID : 6168_CX2SA
Read: GUEST
Subj: AMSAT-BB-digest V2004 #777 3/7
Path: DB0FHN<DB0FOR<DB0SIF<DB0FHK<DB0FBB<DB0IUZ<DB0GOS<DB0RES<DK0WUE<7M3TJZ<
      HS1LMV<CX2SA
Sent: 050704/0717Z @:CX2SA.LAV.URY.SA #:6168 [Minas] FBB7.00e $:6168_CX2SA
From: CX2SA@CX2SA.LAV.URY.SA
To  : SATDIG@WW


Message: 8
Date: Sun, 3 Jul 2005 09:07:15 -0700
From: "Scott Avery WA6LIE" <wa6lie@msn.com>
Subject: Re: [amsat-bb] FT-847 Computer Control

Simon,

The same holds true with CAT control using HRD with my FT-857D.
If you run VOX with short transmissions, the rig updates when the
radio goes into the receive mode. It would be nice it the freqs would update
in TX mode.

73, Scott




From: "Simon Brown (HB9DRV)" <simon@hb9drv.ch>
Subject: [amsat-bb] FT-847 Computer Control


> So I've been trying to set the TX frequency of the FT-847 via CAT control
> while the radio is in transmit mode - and I just get errors. Same with the
> FT-817. Is it just not possible?
>
> Assuming it can't be done how does one correctly use a linear transponder
> such as VO-52 with the FT-847 via computer control? While I am
> transmitting
> I must keep my transmit frequency correctly adjusted so that I don't
> wander
> over other QSO's.
>
> I still have more FT-847 testing this next week to try and find the best
> or
> the worst-case scenarios.
>
> I am coming to the opinion that the only radio(s) I can correctly use are
> from ICOM as the transmit frequency of the TS-2000 cannot be changed by
> computer control while in transmit mode. I think either the IC-7000 or
> IC-910H will be used.
>
> Simon Brown
> ---
> www.hb9drv.ch www.laax.ch
- ----
Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
Not an AMSAT member? Join now to support the amateur satellite program!
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org

------------------------------

Message: 9
Date: Sun, 3 Jul 2005 09:15:31 -0700 (PDT)
From: K6IA-Howard Stephenson <kg6wp@yahoo.com>
Subject: [amsat-bb] Hellscreiber on FO-29

For the last few days I've been hearing Hellscreiber
on FO-29. Didn't think much about it until this
mornings 1540 UTC pass, when I noticed the AGC was
starting to pump in time with the keying of the
Hellscreiber. It is tough tracking with doppler but I
did get a call, not 100% sure it's right though. If
someone could try to copy it on the next pass and
verify, maybe we can contact them and ask if they
could please turn the power down a little.
73
Howard Stephenson K6IA
- ----
Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
Not an AMSAT member? Join now to support the amateur satellite program!
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org

------------------------------

Message: 10
Date: Sun, 03 Jul 2005 07:12:53 -0400
From: Emily Clarke <w0eec@amsat.org>
Subject: Re: [amsat-bb] W0EEC QRV in FN66

Hi Al,

I don't know if I will be in FN55 after all.  It turns out that the GPS
is telling me I am in FN66.  I will be in FN56, which turns out to be
just across the road.  Probably do that on Monday or Tuesday.  Sure wish
AO-51 was turned on, but am still working SO-50 (plus the SSB sats.)

73,

Emily



Alvaro de Leon Romo wrote:
> Dear Emily do you know when you will be in FN55 ?
> Best regards
> Al
- ----
Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
Not an AMSAT member? Join now to support the amateur satellite program!
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org

------------------------------

Message: 11
Date: Sun, 3 Jul 2005 19:30:34 +0200
From: "Simon Brown \(HB9DRV\)" <simon@hb9drv.ch>
Subject: Re: [amsat-bb] FT-847 Computer Control

Sadly I don't think any Yaesu HF radios (except maybe the FTDX-9000) can be
updated while you are in TX mode. So VOX or making shorts breaks may well be
the only alternative.

Simon Brown
- ---
www.hb9drv.ch www.laax.ch

- ----- Original Message -----
From: "Scott Avery WA6LIE" <wa6lie@msn.com>


> Simon,
>
> The same holds true with CAT control using HRD with my FT-857D.
> If you run VOX with short transmissions, the rig updates when the
> radio goes into the receive mode. It would be nice it the freqs would
> update in TX mode.
>
> 73, Scott
- ----
Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
Not an AMSAT member? Join now to support the amateur satellite program!
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org


Read previous mail | Read next mail


 17.11.2026 00:06:16lGo back Go up