OpenBCM V1.13 (Linux)

Packet Radio Mailbox

DB0FHN

[JN59NK Nuernberg]

 Login: GUEST





  
CX2SA  > SATDIG   04.07.05 08:30l 180 Lines 6804 Bytes #999 (0) @ WW
BID : 6167_CX2SA
Read: GUEST
Subj: AMSAT-BB-digest V2004 #777 2/7
Path: DB0FHN<DB0FOR<DB0SIF<DB0FHK<DB0FBB<DB0IUZ<DB0GOS<DB0RES<DK0WUE<7M3TJZ<
      HS1LMV<CX2SA
Sent: 050704/0717Z @:CX2SA.LAV.URY.SA #:6167 [Minas] FBB7.00e $:6167_CX2SA
From: CX2SA@CX2SA.LAV.URY.SA
To  : SATDIG@WW


Message: 5
Date: Sun, 03 Jul 2005 09:26:54 -0500
From: "Gary Mayfield" <gary_mayfield@hotmail.com>
Subject: RE: [amsat-bb] FT-847 Computer Control

I'm away from my station right now, but if memory serves me correctly
FODTrack control works doing this with the FT-847.  You may want to email
Manfred and ask how does/did it.

73,
Joe
kk0sd/0 in KS right now

From: "Simon Brown (HB9DRV)" <simon@hb9drv.ch>
Reply-To: "Simon Brown (HB9DRV)" <simon@hb9drv.ch>
To: <amsat-bb@amsat.org>
Subject: [amsat-bb] FT-847 Computer Control
Date: Sun, 3 Jul 2005 14:38:49 +0200

So I've been trying to set the TX frequency of the FT-847 via CAT control
while the radio is in transmit mode - and I just get errors. Same with the
FT-817. Is it just not possible?

Assuming it can't be done how does one correctly use a linear transponder
such as VO-52 with the FT-847 via computer control? While I am transmitting
I must keep my transmit frequency correctly adjusted so that I don't wander
over other QSO's.

I still have more FT-847 testing this next week to try and find the best or
the worst-case scenarios.

I am coming to the opinion that the only radio(s) I can correctly use are
from ICOM as the transmit frequency of the TS-2000 cannot be changed by
computer control while in transmit mode. I think either the IC-7000 or
IC-910H will be used.

Simon Brown
- ---
www.hb9drv.ch www.laax.ch ----
Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
Not an AMSAT member? Join now to support the amateur satellite program!
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org
- ----
Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
Not an AMSAT member? Join now to support the amateur satellite program!
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org

------------------------------

Message: 6
Date: Sun, 3 Jul 2005 11:03:08 -0400
From: Iain McFadyen <ki4hlv@gmail.com>
Subject: Re: [amsat-bb] Re: Up and dwnlink polarization of HAMSAT

No!
You are correctly quoting the direction of rotation assuming a
2-dimensional object,...
BUT... there is a third dimension: Hence the need to recall the
three-fingered salute everyone learned in the Physics lab, with one finger
pointing in each plane....
Radiation leaving the helix is travelling away from you and in a clockwise
direction. This is RHCP.
Radiation entering the helix is travelling towards you and in an counter
clockwise direction. This is also RHCP.
Iain KI4HLV
On 7/3/05, Dave G. <dmg@bossig.com> wrote:
>
> If my own "Rule of Thumb" is correct, the way I visualize it
> is;
>
> Starting from the helical antenna feed point, if the electron
> flow is clockwise then it is RHCP. And, viewed from the same
> feed point on the same antenna, any arriving electrons will
> travel to down the helix as LHCP.
>
> But I don't have a "Rule of Thumb" for crossed yagi's or
> diversity antennae.... they totally confuse me...
>
> Dave KK7SS
- ----
Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
Not an AMSAT member? Join now to support the amateur satellite program!
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org

------------------------------

Message: 7
Date: Sun, 03 Jul 2005 11:39:01 -0400
From: "Robert Bruninga" <bruninga@usna.edu>
Subject: Re: [amsat-bb] Hey did you know that . . . .

>Echo/AO-51 turned 1 year 4 days ago?.... Now, I
>wonder when will we see  Echo's UI digipeating....
> ...[and] a way to link with the Kenwood radios.

There is no technical reason why digipeating cannot be
enabled.  It is probably just a matter of priorities on the
busy command team.   The ECHO web site says:

>>Due to restrictions in the Satellite, there can be
>>no digi... on Echo at this time.....  Echo ...
>>will only pass AX.25 packets beginning with a
>>certain character... 'P'...  Therefore, the digi
>>packet will not get through the SCC unless the
>>destination station call sign begins with... 'P'.

But a UI or any APRS packet can be addressed to
any special callsign (In APRS it is called an ALTNET).
Any packet user (including APRS) can just set their
AX.25 destination (or ALTNET) to something like
"PECHO" and the problem is solved.  If ECHO has
the digipeat bit set ON, then digipeating via one
of the shared digital uplink channels probably could
work.

Note that this restriction of addressing the packet
to a address starting with a "P" will prevent POSITS
from the D7 and D700 or any MIC-E packets, from
being digipeated because the packet then begins
with the first digit of latitude.  But, it will allow those
radios in MESSAGE mode to send and receive APRS
messages from radio to radio if they set the right
UNPROTO (PECHO).

Note:  (if you change your UNPROTO in the kenwood,
write it down first, since it shows your version
number of the firmware in your radio and you will want
to restore that when not trying to digi via ECHO.

Don't forget though, that ECHO is 9600 baud so
normal terrestrial TNC's at 1200 baud wont work.
But the D7 and D700 with their built-in 9600 baud
TNC's are perfect for this application.  I assume the
Alinco with built-in TNC will also work, but it will
need an external PC to interface to the human op.

I think this will be a great capability and will not
interfere with normal FM and other experimental
modes on ECHO.  UI digipeating can share the
9600 baud digital channel which is ON most of the
time anyway.

In fact, we can get around the "P" restriction
even for position reports by simply shifiting
our LATITUDE digits to the right one space.
ANy latitude below 10 degrees already begins
with a "P" in the Mic-E format used by these
radios.  So instead of entering DDMM.HH for
latitude, simply enter 00DD.MM and this position
can be properly interpreted on receipt.

If eventually this "P" restriction could somehow
be expanded by just a few more digits, (I have
been told this is not  currently possible with
existing firmware and hardware on ECHO)  then:
"A" would open it up for ANY APRS packet
"R" allows D7/700 POSITS in latitudes 20-29
"S" allows D7/700 POSITS in latitudes 30-39
"T" allows D7/700 POSITS in latitudes 40-49
"U" allows D7/700 POSITS in latitudes 50-59

and so those 5 additional characters, if they could
somehow be permitted, would open up ECHO to
support handheld and mobile satellite communications
on the digital channel, with minimal impact on any
other uses of the satellite.

Hopefully one day, the digi bit can be enabled
for an experiment to see how well this works.

de Wb4APR, Bob
- ----
Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
Not an AMSAT member? Join now to support the amateur satellite program!
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org


Read previous mail | Read next mail


 16.11.2026 23:49:14lGo back Go up