| |
CX2SA > SATDIG 29.06.05 06:06l 201 Lines 7328 Bytes #999 (0) @ WW
BID : 3730_CX2SA
Read: GUEST
Subj: AMSAT-BB-digest V2004 #768 6/7
Path: DB0FHN<DB0MRW<DB0WUE<DK0WUE<7M3TJZ<JE7YGF<CT2GWY<W4JAX<CX2SA
Sent: 050629/0441Z @:CX2SA.LAV.URY.SA #:3730 [Minas] FBB7.00e $:3730_CX2SA
From: CX2SA@CX2SA.LAV.URY.SA
To : SATDIG@WW
Message: 16
Date: Tue, 28 Jun 2005 15:34:15 -0400
From: sco@sco-inc.com
Subject: [amsat-bb] Nova w Doppler
Does anyone use Nova with any kind of computer doppler control software?
I looked at SatPC32 but i really like the way Nova looks and feels for most
things. But I want to add computer doppler control ... and still be able to
turn the main VFO by hand while the computer tunes the other link.
Les
W4SCO
- ----
Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
Not an AMSAT member? Join now to support the amateur satellite program!
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org
------------------------------
Message: 17
Date: Tue, 28 Jun 2005 15:48:32 EDT
From: G0MRF@aol.com
Subject: [amsat-bb] Re: S band to 70cms converters
Thanks Mike, Bob, Ed and Greg
For your comments and advice on VCO range in Drake and Transystems
converters.
Generally it seems that the Drake will go to a 70cms IF possibly with a
small modification of the VCO or possibly without......if I'm lucky.
My original idea was to use 70cms to avoid the high powered 3G base stations
on the normal image frequency of 144MHz here in Europe. In retrospect it may
be easier with the transystems to go to the other side of the LO and stick
to 144MHz. (and remember the inversion on the IF radio for the downlink).
Anyway, plenty of clues and places to start.
Hope to have a couple to measure on the test equipment at the AMSAT-UK
meeting at the end of July.
Thanks again. Will post any interesting results on my web site along with
the other satellite related bits and bobs
David G0MRF
- ----
Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
Not an AMSAT member? Join now to support the amateur satellite program!
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org
------------------------------
Message: 18
Date: Tue, 28 Jun 2005 19:26:17 GMT
From: Richard@g3rwl.demon.co.uk (Richard W L Limebear)
Subject: [amsat-bb] SSTV usage
Hey Gang
I'm rewriting Amsat-UK's beginners' book. I want to say something about
sstv but I don't know anything about it :(
In the previous edition of the book I said this:
Begin
Most satellite sstv operators currently use the Scottie-1 mode,
but many operators use MMSSTV software so CQs in Robot36 mode
will also be received automatically. Doppler shift on the
downlink frequency can be a disturbing factor so it is
suggested that operators send the 1200Hz tone for about 5 sec
or more at the start of transmissions. Do not move the uplink
frequency between transmissions.
end
I'd be very grateful if users of the mode could bring me up to date.
73
Richard W L Limebear G3RWL
g3rwl@amsat.org
FOC # 1188
So many beautiful girls ..... (sob) so little time
- ----
Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
Not an AMSAT member? Join now to support the amateur satellite program!
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org
------------------------------
Message: 19
Date: Tue, 28 Jun 2005 17:44:56 -0500 (GMT-05:00)
From: wb5tuf@earthlink.net
Subject: [amsat-bb] Satellite tracking hardware/software
I am looking for suggestions on the latest tracking software and hardware.
I haven't been seriously active since ao-13 crashed. I have a Yaesu FT 736,
5400 rotator, and the KC tracker
board ( it doesn't fit in my laptop ;-) ).
What are the best tracking devices ( USB or serial) and software these days? I
would like to move the antennas and control the FT-736.
Thanks,
Glenn
WB5TUF
- ----
Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
Not an AMSAT member? Join now to support the amateur satellite program!
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org
------------------------------
Message: 20
Date: Wed, 29 Jun 2005 00:37:28 +0200
From: "IW7ECJ, Joe" <iw7ecj@libero.it>
Subject: R: [amsat-bb] SAT Mode on IC-910H / FT-847
Hi Simon...
You already have a reply to this question, but I'll add my comments that are
related to a TS-2000 (SAT capable like the 910 / 847...)
> I don't own a radio with SAT mode, please help me here.
>
> I set the RX VFO to 145.900, the TX VFO to 435.350 and press the SAT
> button.
OK... here the TS-2000 is similar to the 910H, and I believe to the 847:
Pressing "SAT" Button gives you access to a specialized MEMORY mode... I
would say a "Half memory-Half VFO Mode" since HRD is still able to read the
frequencies of my TS-2000...
>
> [1] What happens if I change the RX freq to 145.910 - what is the new TX
> frequency?
If the RTX is set for "Normal Trace", TX changes to 435.360
IF the RTX is set for "Reverse Trace" TX changes to 435.340
The former Trace mode is for Non-Inverting Transponders, the latter is for
Inverting Transponders (VO-52)
> [2] What happens if I change the TX freq to 435.340 - what is the new RX
> frequency?
Normally, if you change the TX frequency, the RX follows the same behavior
detailed above but...
The TS-2000 has a particular set-up that allows the TX frequency to be
changed WITHOUT affecting the RX... even if in one of the Trace modes...
This is handy when you follow the rule of changing ONLY your TX frequency
(well... actually the highest of the two frequencies, because is more
subject to Mr.Doppler...) to compensate for Doppler shift, leaving the RX
absolutely FIXED! Without this option, each time you need to correct for
Doppler, you HAVE to disengage the Trace function, and re-engage it when you
need to QSY around in the passband of the SAT transponder searching for
contacts or for a clear frequency
> To correctly compensate for Doppler on VO-52 I assume that I must update
> *both* VFO's even when the radio is in SAT mode.
This, I believe, is covered in the link I posted before... when using full
PC control of the rig for Doppler correction, both RX & TX should be read
and updated... this is to maintain the same frequency AT THE SATELLITE! Of
course, this mean that signals will be travelling in the passband when seen
from Earth...
The trouble starts, I believe, because not all people are using full PC
control, nor are they ALL using manual Doppler correction techniques :-)
> Exactly what does SAT mode do - in simple terms please :)
On my TS-2000, the SAT button puts the rig in that special Memory mode and
allows full duplex operation of the transceiver while making available
"Trace Mode" to allow easy QSY in the SAT passband... once you have
correctly set your TX to allow for clear reception on the DL, I mean...
> Myself I am looking at controlling two radios, probably TX with the FT-817
> and RX with IC-7800 + transverter.
Nice set-up you are going to assemble, Simon...
About your question on transverters in another post...
You may try http://www.ssb-amateur.de/amateur/index_e.html , but prices are
high anyway or, if you settle for a downconverter instead of a transverte,
please check this website:
http://www.keps.it/
Ciao Simon... hope to hear you calling on VO-52 one of these nights...
73 de Joe, IW7ECJ
- ----
Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
Not an AMSAT member? Join now to support the amateur satellite program!
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org
Read previous mail | Read next mail
| |