| |
CX2SA > SATDIG 29.06.05 06:06l 184 Lines 6038 Bytes #999 (0) @ WW
BID : 3731_CX2SA
Read: GUEST
Subj: AMSAT-BB-digest V2004 #768 7/7
Path: DB0FHN<DB0MRW<DB0WUE<DK0WUE<7M3TJZ<F6KMO<HR1FBB<CX2SA
Sent: 050629/0441Z @:CX2SA.LAV.URY.SA #:3731 [Minas] FBB7.00e $:3731_CX2SA
From: CX2SA@CX2SA.LAV.URY.SA
To : SATDIG@WW
Message: 21
Date: Wed, 29 Jun 2005 01:01:43 +0200
From: "IW7ECJ, Joe" <iw7ecj@libero.it>
Subject: R: R: [amsat-bb] Vo-52 Daft Question
Hi Iain...
Thank you for your suggestion... your comments are very appreciated here...
I've been doing something similar a few days back, when I started looking
into this stuff, but I preferred to correct that constant offset with the
XIT function of the RTX...
Needless to say, it worked fine, but the whole thing gets tricky and I often
forgotten to clear XIT if I needed the RIT on the other party's signal...
there is no way to have XIT AND RIT together in the TS-2000...
I'll be trying to offset the stored frequencies in HRD sometime this week,
but I'm afraid it would be a bit tricky as well, since I usually start
calling in the center of the transponder passband, then I QSY around looking
for signals...
I'll let you know what comes out...
Thank you again, Iain...
73 de Joe, IW7ECJ
I have a simple suggestion which may fix your problem completely:
You probably have 145.9000 programmed into HRD for your rx, and 435.2500
programmed as your tx, right?
You have to adjust the transponder center frequencies programmed into HRD
slightly, to take account of the fact that your rig is displaying the
frequency of the suppressed carriers, not the center of the audio passband
for tx and rx.
- ----
Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
Not an AMSAT member? Join now to support the amateur satellite program!
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org
------------------------------
Message: 22
Date: Tue, 28 Jun 2005 19:17:26 -0400 (EDT)
From: n4qwf@ntelos.net
Subject: Re: [amsat-bb] Satellite tracking hardware/software
Well, here is my 2 cent worth. I used the KCT/t for years. I have two and
really like them. Sure hate they are not being updated to PCI. Oh well! I
bought a Uni_Trac serial port version about a year or so ago and I like it
just fine. It works with both my 736 and 847 at the same time. It controls
my 5400 Yaesu nicely and I have had no problem with the hardware. I used a
USB/serial converter with it and that worked just fine.
The downside is the software. I have had a few complaints about it. Sure
wish the code was available for someone to work on a new version. The
author is not supporting it I understand. It is a nice piece of software
and would be even better if it had a little smoothing done on it.
All and all I guess I would recommend this interface. There you have it.
73's << John
> I am looking for suggestions on the latest tracking software and hardware.
> I haven't been seriously active since ao-13 crashed. I have a Yaesu FT
> 736, 5400 rotator, and the KC tracker
> board ( it doesn't fit in my laptop ;-) ).
> What are the best tracking devices ( USB or serial) and software these
> days? I would like to move the antennas and control the FT-736.
>
> Thanks,
>
> Glenn
> WB5TUF
> ----
> Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
> Not an AMSAT member? Join now to support the amateur satellite program!
> To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org
- ----
Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
Not an AMSAT member? Join now to support the amateur satellite program!
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org
------------------------------
Message: 23
Date: Tue, 28 Jun 2005 13:18:14 -0700
From: "Bill Ress" <wjr@ispwest.com>
Subject: RE: [amsat-bb] Slate of Officers Issue BOD / Elections
Hi Kevin,
As an AMSAT member, I need to thank you for your personal challenge to the
non-members on this BB. Not everyday someone does put their money where
their mouth is.
We would appreciate hearing from Martha how quickly the challenge is taken
up.
Thanks again....Bill - N6GHz
AMSAT #21049
- -----Original Message-----
From: owner-AMSAT-BB@amsat.org [mailto:owner-AMSAT-BB@amsat.org]On
Behalf Of kevin schuchmann
Sent: Monday, June 27, 2005 6:37 PM
To: amsat-bb@amsat.org
Cc: bod@amsat.org; martha@amsat.org
Subject: [amsat-bb] Slate of Officers Issue BOD / Elections
Hi All,
First off I would like to thank Rick and others who have posted to the
BB the info for their re-election, I KNEW that AMSAT works hard for its
members but that it is not always clearly visible at all times.
In retrospect my second sarcastic email to the BB was out of line and
there were much better ways to have re-approached the subject.
AMSAT needs more members and more income if these people are going to be
able give us what we want... more SATS!
To that end I would like to put my money where my big mouth is, I will
match the $44 membership fee for every one of you non-members here on the
BB that joins in the next two weeks up to $1000 dollars. If you have been
sitting on the fence please look at what some of the BOD's have been doing
for you to use the Sats that you have now like ECHO and join AMSAT knowing
that your membership fee will be matched and will go to AMSAT's latest
project EAGLE.
73
Kevin
WA6FWF
#19623
P.S. I don't know if you will be joining in time for this years election,
but there is always next
year :-)
- ----
Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
Not an AMSAT member? Join now to support the amateur satellite program!
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org
- ----
Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
Not an AMSAT member? Join now to support the amateur satellite program!
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org
------------------------------
End of AMSAT-BB-digest V2004 #768
*********************************
----
Sent via amsat-bb@amsat.org. Opinions expressed are those of the authors.
Not an AMSAT member? Join now to support the amateur satellite program!
To unsubscribe, send "unsubscribe amsat-bb-digest" to Majordomo@amsat.org
Read previous mail | Read next mail
| |