OpenBCM V1.13 (Linux)

Packet Radio Mailbox

DB0FHN

[JN59NK Nuernberg]

 Login: GUEST





  
CX2SA  > SATDIG   24.06.05 05:11l 148 Lines 4874 Bytes #999 (0) @ WW
BID : 65481-CX2SA
Read: GUEST
Subj: AMSAT-BB-digest V2004 #756 7/8
Path: DB0FHN<DB0MRW<DB0SON<DB0SIF<DB0EAM<DB0SMG<DB0RES<DK0WUE<7M3TJZ<EA5AKC<
      CX2SA
Sent: 050624/0322Z @:CX2SA.LAV.URY.SA #:65481 [Minas] FBB7.00e $:65481-CX2SA
From: CX2SA@CX2SA.LAV.URY.SA
To  : SATDIG@WW


Message: 24
Date: Thu, 23 Jun 2005 22:46:29 +0000
From: "Pieter Ibelings" <sietetrescincoprimo@hotmail.com>
Subject: Re: [amsat-bb] 2m to 70cm upconverter design, any interrest ??

Way too expensive when you can get a new Yaesu FT-857 for $629




>From: Andrew Glasbrenner <glasbrenner@mindspring.com>
>Reply-To: Andrew Glasbrenner <glasbrenner@mindspring.com>
>To: William Leijenaar <pe1rah@yahoo.com>, amsat-bb@amsat.org
>Subject: Re: [amsat-bb] 2m to 70cm upconverter design, any interrest ??
>Date: Thu, 23 Jun 2005 16:26:35 -0400 (GMT-04:00)
>
>Hamtronics _used_ to make the XV4. It was something like 10mw in on 28 mhz,
>1 watt out on 432 or 435. Sold as a kit for $90 about 5 years ago. I bet if
>there was a group order, or enough demand, maybe they'd bring it back.
>
>The offer of the kit is admirable, but frankly at $250 assembled you could
>find any number of used 432 all mode transceivers for similar cost. DEM has
>a 10mw 432/435 transverter kit minus hardware and box for $180. Thats
>transmit AND receive.
>
>73, Drew KO4MA
>
>-----Original Message-----
>From: William Leijenaar <pe1rah@yahoo.com>
>Sent: Jun 23, 2005 3:08 PM
>To: amsat-bb@AMSAT.Org
>Subject: [amsat-bb] 2m to 70cm upconverter design, any interrest ??
>
>Hi AMSATs,
>
>To get on the 70cm HAMSAT uplink is not easy for many
>hams in the world. FM handies are available, but other
>modes than FM is very rare and to expensive for those
>hams.
>
>To get them on 70cm ssb the best way is to use an
>upconverter from their widely available HF. With use
>of an upconverter an 10m ssb signal will be converted
>into an 70cm ssb signal and can be used for HAMSATs
>uplink.
>With use of a 2m to HF down-converter the same HF can
>be used for receiving the HAMSATs ssb downlink.
>
>I have been looking around the web to find available
>converters. For 2m to 10m down-converters there are
>several options, with good prices. Unfortunatly for
>10m to 70cm up-converters there is very little
>available and with high prices.
>
>Because of this I have been working on a cheap and
>simpel to make design. After some weeks testing and
>experimenting I got something on the test bench.
>
>The prototype can be seen on my webpage:
>www.qsl.net/pe1rah/10m70cm.htm
>
>or via my main page:
>www.qsl.net/pe1rah
>
>The features of the design are:
>-------------------------------
>* Made on a PCB
>* In a metal box (74mm x 148mm x 30mm)
>* 407MHz local oscillator build in
>* 12Vdc power supply
>* 50mW output on 70cm (enough to drive M57716 10W
>power module)
>* 28MHz BNC input, 70cm BNC output
>* Unwanted suppression >40dB
>* No exotic components
>
>When there is enough interrest I will deliver kits and
>complete constructed converters.
>
>I can not deliver it for a price less than below:
>-------------------------------------------------
>Kits              = 175 USD (+ shipping costs)
>Complete build    = 250 USD (+ shipping costs)
>
>!!! Please note that this is a complete TX
>upconverter, included PCB, Crystal, metal box, BNC
>connectors etc etc
>!!! The only thing needed to be qrv on HAMSAT 70cm
>uplink is a final amplifier.
>!!! Best solution is a M57716 module that give 10W
>output at the 50mW input.
>
>Let me know if there is any interrest,
>
>73,
>William Leijenaar
>PE1RAH
>---
>
>
>
>__________________________________
>Discover Yahoo!
>Get on-the-go sports scores, stock quotes, news and more. Check it out!
>http://discover.yahoo.com/mobile.html
>----
>Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
>Not an AMSAT member? Join now to support the amateur satellite program!
>To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org
>----
>Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
>Not an AMSAT member? Join now to support the amateur satellite program!
>To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org
http://messenger.msn.click-url.com/go/onm00200471ave/direct/01/
- ----
Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
Not an AMSAT member? Join now to support the amateur satellite program!
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org

------------------------------

Message: 25
Date: Thu, 23 Jun 2005 19:36:07 -0400
From: Don Woodward <don@w-ent.com>
Subject: Re: [amsat-bb] Uni_Trac w Nova

On Thu, 2005-06-23 at 09:19 -0400, sco@sco-inc.com wrote:
> Can I use my Uni_Trac 2003 computer interface with Nova without running the
> Uni_Trac software?
> If so, how?
> My SASI is bad and it looks like I need to use this new Uni_Trac 2003 for FD.
>
> Les
> ----


No.

Don Woodward
- ----
Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
Not an AMSAT member? Join now to support the amateur satellite program!
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org


Read previous mail | Read next mail


 16.11.2026 05:02:21lGo back Go up