| |
CX2SA > SATDIG 24.06.05 05:11l 79 Lines 3011 Bytes #999 (0) @ WW
BID : 65482-CX2SA
Read: GUEST
Subj: AMSAT-BB-digest V2004 #756 8/8
Path: DB0FHN<DB0MRW<DB0SON<DB0SIF<DB0EAM<DB0SMG<DB0RES<DK0WUE<7M3TJZ<EA5AKC<
CX2SA
Sent: 050624/0322Z @:CX2SA.LAV.URY.SA #:65482 [Minas] FBB7.00e $:65482-CX2SA
From: CX2SA@CX2SA.LAV.URY.SA
To : SATDIG@WW
Message: 26
Date: Thu, 23 Jun 2005 19:23:49 -0600
From: Jerry Clement <stormchaser@shaw.ca>
Subject: [amsat-bb] pocketsat data
Now that everyone has laid it out how to download keps for pocketsat on your
PDA, here is the only way for the latest data. I use this method. First get a
password for www.Spacetrack.com then go to www.celestrak.com and click on
current data, then download spacetrack tle retriever. Once you set this
program up with your password for spacetrack, It is as simple as clicking the
download button on the tle retriever for the data from spacetrack, then the
process data button. The next time you hot sync, you have the absolute latest
keps. Of course you have to set up tle retriever program for your palm. I use
my PDA everyday in my mobile for sat tracking. Its great.
Jerry VE6AB
- ----
Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
Not an AMSAT member? Join now to support the amateur satellite program!
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org
------------------------------
Message: 27
Date: Thu, 23 Jun 2005 19:29:55 -0700
From: "Greg D." <ko6th_greg@hotmail.com>
Subject: RE: [amsat-bb] Simple Helix for Mode S
Hi Robin,
The simplest design I've seen so far (credit to Howard Long G6LVB) is to
make the helix out of #10 or #12 solid copper wire, an N-connector, and the
bottom of a 4" tin can. Look towards the bottom of
http://home.jps.net/~gregd/hamsite.htm (skip the first attempt, which did
not work well). The critical parameters are for one loop to take 146mm of
wire, and space them 32mm center-center. I marked the wire at 146 mm
increments, and wound it around the cardboard tube from a paper towel for
starters. Twist and stretch it to get the 146mm lines to line up, properly
spaced; don't sweat the diameter, it will take care of itself. Then cut it
to length, and solder it to the N connector as low on the center pin as you
can get it without shorting things out. I understand that odd multiples of
1/4 turn is best (so, 5 1/4 turns or 5 3/4, not 5 1/2).
Good luck,
Greg KO6TH
I'm sure this has been asked before so sorry in advance for the repeat......
Can anyone send me a pointer to the dimensions or construction details for a
helix for Mode S. I did a google search but it didn't turn up much.....
probably better to send to me directly rather than spam the whole group.
Thanks
Robin
W7YED
- ----
Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
Not an AMSAT member? Join now to support the amateur satellite program!
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org
------------------------------
End of AMSAT-BB-digest V2004 #756
*********************************
----
Sent via amsat-bb@amsat.org. Opinions expressed are those of the authors.
Not an AMSAT member? Join now to support the amateur satellite program!
To unsubscribe, send "unsubscribe amsat-bb-digest" to Majordomo@amsat.org
Read previous mail | Read next mail
| |