| |
PA2WIV > AGW 12.04.06 13:03l 36 Lines 1065 Bytes #999 (0) @ WW
BID : 641_PA2WIV
Read: GUEST
Subj: Re:AGW PTT not working ?
Path: DB0FHN<DB0MRW<OK0PPL<DB0RES<DK0WUE<7M3TJZ<F6KMO<KP4IG<EA3RKU<EA5DVS<
EA5DV<PI8CDR
Sent: 060412/1053Z @:PI8CDR.#DRE.NLD.EU #:52636 [Beilen] $:641_PA2WIV
From: PA2WIV@PI8CDR.#DRE.NLD.EU
To : AGW@WW
# Generated by: TstHWin v2.21b - Registered to PA2WIV
# On : 12-4-06 12:05:26
# UTC: 12-4-06 10:05:26
>From: VK2KGZ@VK2IO.#SYD.NSW.AUS.OC
>To : AGW@WW
>
>
>[¯¯¯ TST HOST v1.42b, Local time: Thu Feb 09 22:18:55 1995 ®®®]
>
>Hi name is Greg. I have been trying to set up AGWPE with WINPACK.
>and sound card, AGW loads properly and I can monitor packets ok and have tx
>tones but there is no ptt on the serial port. Can anybody shed some light
>on the subject.
>Regards Greg.
When using the PTT-diagram with a transistor as in the included diagram in
AGW I can only think on wrong com-port number....as with my pc, there are
wrong numbers at the ports as I discovered. My mouse is on com 1, but on
the housing is stated 2.
Hoping this cures the fault....and that the com-port is not defect....
Here AGWPE is used with TstHWin 2.21b, do not need it for more than packet.
Perhaps more Winpack users are familiar with the fault and can help better.
Vy 73 Tinus PA2WIV@PI8CDR
e-mail alias at: amsat.org / qsl.net
Read previous mail | Read next mail
| |
