| |
G6KUI > PACKET 28.04.04 00:09l 21 Lines 731 Bytes #999 (0) @ WW
BID : 70433-G6KUI
Read: GUEST
Subj: Re: * 9k6 *
Path: DB0FHN<DB0RGB<OK0PPL<DB0RES<ON0AR<GB7CIP<GB7WSX<GB7YFS<GB7MAX<GB7DBY<
GB7DBY
Sent: 040427/2206z @:GB7DBY.#23.GBR.EU NPF2.54c [G6KUI PMS Alvaston Derby]
Graham G6YFF wrote.....
}
} The Yaesu tranceivers that are 9k6 ready actually do work. I have an
} FT-8100 and an FT-847 and both work excellently at 9k6 using a PacComm
} Spirit-2 High Performance Packet Controller (not a cheap solution but it
} works). Got it going within 10 mins out of the box and that was two years
} ago. It is apparently capable of working at up to 56k! Apart from a
} local ham who has moved on to other things there is not much now going on.
}
Well the FT-2600 works fine on RX but absolutely useless on TX, and to
make matters worse the innards don't correspond to the circuit diagram
in the critical TX area :-((
The FT-100D works fine on 9k6.
73, Pete G6KUI
Message sent with NPFPMS V2.54c
Read previous mail | Read next mail
| |
