DB0FHN

G6YPK  > YAPP     15.09.96 08:40l 25 Lines 935 Bytes #-10402 (0) @ WW
BID : 58511_GB7PMB
Read: S52RF DB6SB S56UTN GUEST
Subj: YAPP TRANSFER PROBlEM ???
Path: DB0AAB<DB0MWS<DB0LAN<DB0ABH<DB0SRS<DB0SIF<DB0AIS<DB0NDK<DB0ACH<DB0PKE<
      DB0ACC<PI8DRS<PI8DAZ<PI8DRE<PI8WFL<PI8VNW<GB7PMB
Sent: 960913/1659Z @:GB7PMB.#28.GBR.EU #:58511 [Minsterley] $:58511_GB7PMB
From: G6YPK@GB7PMB.#28.GBR.EU
To  : YAPP@WW

   Thank you for reading this plea for understanding what may be happening
   with my YAPP data (using Packet 6.1) transfer protocol on my Kantronics 
   KPC-II tnc.

   Yapp down load starts normally, but after a few bytes into the data 
   transfer, I get an "UNKNOWN PACKET TYPE" (inc a number 43 or some other
   number) and then the data transfer is aborted.

   My perimeters have been set to that of a colleague, who has never had
   experience of any problems in YAPP data transfer from either a BBS or
   from another ham.   I have not discounted that TNC being at fault, with
   the World chip being suspect. 
   
   The problem IS my end, and any ideas or pointers towards resolving 
   this problem would be appreciated.


                      ÉÍ» ÉÍ»  DE TONY. WELLINGTON. SHROPSHIRE.
                        º  ͹  G6YPK @ GB7PMB.#28.GBR.EU
                        Ð Èͼ  


Read previous mail | Read next mail