| |
G0FTD > FT817 07.04.08 12:49l 29 Lines 944 Bytes #999 (0) @ WW
BID : 080491097PZT
Read: GUEST OE6POD DO2BFW VE7HFY
Subj: PA /Filter board removal?
Path: DB0FHN<DB0NOE<DB0GAP<DB0GPP<DB0SEL<DB0ZDF<DB0II<DB0UHC<DB0RES<ON0AR<
GB7SYP<GB7PZT
Sent: 080407/0934Z @:GB7PZT.#24.GBR.EU [Kidderminster] #:49108 XSERV410h
Date: Mon, 07 Apr 2008 10:34:45 +0000
From: g0ftd@gb7pzt.#24.gbr.eu (Andy)
To: ft817@ww
Subject: PA /Filter board removal?
Greetings FT817 fans.
I've just removed the filter/pa board out of the chassis for a visual
inspection check (which proved unecessary) in the end.
Now I find that there's a dratted 3 pin interconnection (Harwin pin)
thing that makes the refitting of the the PA/Filter reassembly difficult.
It connects the Main PCB to the PA/Filter PCB together.
The problem is getting the darn Harwin pin connector to mate up properly
with the main PCB, if you've taken one apart you'll know what I mean.
Is there a trick to getting it in, or will I have to unsolder it,
place it in the main PCB first, then remate the PCB's and resolder the
3 pins once the PA/FILTER pcb is in place?
I have the Yaesu technical supplement docs, but they lack good enough
assembly / disassembly instructions (grrrr).
- Andy -
G0FTD @ GB7PZT
Read previous mail | Read next mail
| |
