| |
G1NNB > XROUT 26.02.05 01:29l 34 Lines 1245 Bytes #999 (0) @ WW
BID : 22382_GB7ESX
Read: OE3GMW GUEST
Subj: Re: Xrouter + FBB + DRSI
Path: DB0FHN<DB0RGB<OK0PPL<DB0RES<ON0AR<7M3TJZ<HG8LXL<I0TVL<GB7YKS<GB7LGS<
GB7ESX
Sent: 050225/2320z 22382@GB7ESX.#31.GBR.EU $:22382_GB7ESX [Witham, Esx]NNA V3.1
>
>From: G3LDI@GB7LDI.#35.GBR.EU
>To : XROUT@WW
>
>Hi.
>
> I am running the following on one Pentium 120 with W98SE.
>
>FBB 7.00i 144mHz and 432mHz.
>Two DRSI cards for these ports one on 300H int2 and the other 310H int7
>AR Cluster with AGW with a PC320 card and Ascom 70mHz radio for linking.
>Xrouter to interface FBB with Cluster.
>
> FBB runs perfectly with the DRSI cards under BPQ 4.08a but I cannot get
>Xrouter to recognise BOTH DRSI cards. The CFG file has been edited under
>DOS edit and runs well UNTIL I introduce the two meter card. Then it tells
>me it cannot find it.
>
> Any ideas? Does anybody run a similar system? I would appreciate any
>suggestions as I have more hair on the floor than on my head now!!
Your problem is proberly caused by the NIC card using the same memory as one
of the DRSI cards. Try setting the NIC card to run at 320H, the interupt is
normaly 10 so that should not conflict. If you can't change the NIC card
change the offending DRSI card memory area.
73 George G1NNB
USING NNA BBS SOFTWARE V3.1.4
Via NNA LINUX CONSOLE V1.0
Email. g.lloyd@essexpkt.co.uk
http://www.essexpkt.co.uk
Read previous mail | Read next mail
| |
