| |
9A4GL > WINTNC 14.08.96 14:01l 20 Lines 1010 Bytes #-10683 (0) @ EU
BID : E869A0BBS001
Read: DL9MFU DJ8RZ DB9JY DL5MCG DB3RP DF5CH DC1RWA 9A7BMN 9A3PX GUEST
Subj: WinTNC TNC screen problem
Path: DB0AAB<DB0PV<DB0WGS<OE3XBS<S50BOX<9A0BBS
Sent: 960814/1134z @:9A0BBS.HRV.EU [BayCom-Mailbox] BCM1.37b
From: 9A4GL @ 9A0BBS.HRV.EU
To : WINTNC @ EU
Hello there !
I used V1.00 before installing V1.01 and all works ok (except few bug
corrected in V1.01). Then I install V1.01 and I found new problem which make
me hard to work with WinTNC. PMS and NODE work ok, but TNC's seems strange,
hi. How it look: on some TNCes screen I can see monitor, the RXed and TXed
texts are mixed with the monitor, the line which is deviding the RX and TX
part of screen is overwritten with monitor too. It is too hard work this way.
After few minutes working with TNC, things became ok on some ports (normaly
port 2 and 4), and ports 1 & 3 are always stupied, hi. Before few days I
change my hard disk drive, so I have installed new windows95 and on the clear
system WinTNC V1.01 and all the same.
Does anyone have the same problem ? How to solve this problem, to work
normaly ?
Thanks a lot.
73 de Tihomir 9A4GL@9A0BBS.#ZAGREB.HRV.EU
email: accy@fly.cc.fer.hr
Read previous mail | Read next mail
| |
