| |
M1BYT > WANTED 02.11.09 22:03l 32 Lines 1466 Bytes #999 (0) @ WW
BID : 3A4636M1BYT
Read: GUEST DL8DT
Subj: Re: 20 Amp Power Supply
Path: DB0FHN<DB0MRW<DK0WUE<GB7FCR
Sent: 091102/2031Z @:GB7FCR.#16.GBR.EU #:34092 [Blackpool] FBB-7.03a $:3A4636M1
From: M1BYT@GB7FCR.#16.GBR.EU
To : WANTED@WW
KI4NCW Opined with considerable skill:-
> I am looking for an inexpensive used 20 amp (or more) p/s to run a IC-735.
> Homebrew is fine as long as it works.
Assuming your local telephone equipment works on 50v DC...
There are always lots of scrap telecomms SWPS's in specialist electronics
scrap dealers, they are very cheap and nothing but the very best quality. All
you need do is change the divider network proving feedback to the power supply
and you can set them to output what ever voltage you like, proving it is less
than the designed for 50v. My shack supply is a 50amp version, adjusted down
to 13.8v - just two resistors to change usually, to set the voltage.
ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
º 73 from Harry, M1BYT @ GB7FCR.#16.GBR.EU º
ÌÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͹
ºInternational Museums Weekends 19th+20th & 26th+27thº
º June 2010 www.ukradioamateur.co.uk/imw/index.html º
ÌÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͹
º The ARC's FL/RAE courses + Newcomers Introduction º
º to amateur radio:- http://www.ukradioamateur.co.uk/ º
ÌÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍËÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͹
º QTH: Garforth, W. Yorks.. º Timed 19:10 º
º harry.m1byt@tiscali.co.uk º 02 Nov 09 º
ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÊÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ
Message sent using WinPack-Telnet V6.80
Read previous mail | Read next mail
| |
