| |
KB2VXA > WANT 03.08.04 09:05l 28 Lines 945 Bytes #999 (0) @ WW
BID : 25887_WT3V
Read: GUEST
Subj: Re: ZS1DJ > Antenna ID
Path: DB0FHN<DB0THA<DB0ERF<DB0FBB<DB0GOS<DB0EEO<DB0RES<ON0AR<VE2PAK<N1UAN<
W1GMF<W1ON<W1ON-5<K1UOL<K1UOL<WA2PNU<KC2COJ<WT3V
Sent: 040802/2306 25887@WT3V.#CNJ.NJ.USA.NOAM $:25887_WT3V
From: KB2VXA@WT3V.#CNJ.NJ.USA.NOAM
To : WANTED@WW
Hi Eldred,
That's simple, you have the hub for a groundplane antenna. As for the
element length, cut them 1/4 wave for the frequency you want. Just
measure the threads with a tap gauge and thread some rods one size larger
diameter than the holes, this is standard when cutting threads. Make the
threaded portion long enough to fit completely into the hole and a little
bit more. Screw on a nut and then the rod into the hole, back it up a few
turns and tighten the nut. This will hold the rod firmly in place and
leave some slack to work with if you want to remove the rods.
73 de Warren, KB2VXA@WT3V.#CNJ.NJ.USA.NOAM
Powered by JCP&L atomic energy.
E-MAIL: kb2vxa@swissinfo.org
**************************************
Preserve the integrity of our network,
stop Internet forwarding!
**************************************
Message timed by cesium laser: 23:15 on 2004-Aug-02 GMT
Read previous mail | Read next mail
| |
