| |
FA1UKP > USCC 31.03.97 16:05l 28 Lines 823 Bytes #-9910 (0) @ EU
BID : 1112_FA1UKP
Read: OE5BYL DL1GET DL1MBW DK0EBC DL9ABF DF1TE DL9GQ GUEST
Subj: Help USCC>4 and TCP/IP
Path: DB0AAB<DB0SL<DB0RGB<DB0ABH<DB0SRS<DB0ZDF<DB0HOM<F6KFT<F6KVE<F1TIV<
F8KLY<F6KDC<F1HAQ<F5ROC<F8KKV<F5MSQ<F6PTT<F1EUC<FA1UKP
Sent: 970329/1402z @:FA1UKP.FRPA.FRA.EU tcp/ip-Bois-le-Roi-77 #:1115 $:1112_FA1
Hi and thanks for reading this msg.
I have a USCC>4 card with one df9ic on chanel 0 and one tcm 3105 on chanel 1.
It works perfectly using BayCom 1.6, BCT or any programm using the flexnet
drivers.
My problem is I'm using JNOS !!!
I compiled all jnos version including the last one 111x6 with the PE1CHL
genericSCC driverbut i get no rx ... I've a good tx bu
t no rx ...
What should I do ? Here are the lines i use in my autoexec.nos:
attach scc 2 init 0x300 2 4 5 -4 0 11 p4915200 10
attach scc 0 ax25 uhf 256 ext 256 fa1ukp
attach scc 1 ax25 vhf 1024 1200 512 fa1ukp
I would like to get this problem solved to use my card under Linux ...
Thanks in advance for help
Best 73's from Martin fa1ukp
Martin-Rath.fa1ukp@@wanadoo.fr http://www.mygale.org/11/fa1ukp
fa1ukp@f6ptt.frpa.fra.euro
fa1ukp@fa1ukp.ampr.org
Read previous mail | Read next mail
| |
