| |
OE1SMC > UNIX 28.08.99 16:34l 51 Lines 1466 Bytes #-9808 (0) @ WW
BID : S89OE1XAB02D
Read: DD5GU DB1RAS GUEST
Subj: wampes and solaris ?
Path: DB0AAB<DB0FSG<DB0SL<DB0RGB<OE5XBL<OE6XAR<OE3XPR<OE1XAB
Sent: 990828/1222z @:OE1XAB.#OE1.AUT.EU [OeVSV-LV1 BBS SysOp OE3DZW] bcm1.41g2
From: OE1SMC @ OE1XAB.#OE1.AUT.EU (Hans)
To: UNIX @ WW
X-Info: No login password
hi all !
i will ask this question in the unix-board, as i think, it is
more unix related than wampes. but maybe, there is somebody out
with an other plattform, had the same problem solved and can
give some tips for me.
the environment: i have running solaris 2.5.1 on sparc from sun
and the latest version of wampes.
i can "connect" to remote node and can use "telnet" and the other tcp/ip
commands within the "net"-commandline to a remote box
without any problems.
now i want to use telnet from the unix shell or other
programms, like netscape or so.
i think, i have to setup an interface within unix, which must
carry the default route in future time.
but how to do this, setting up an interface ?
i tried to setup a second loopback-interface lo0:1 and as i have
installed isdn 1.0.4 i can plumb an addition "ifppp"
but never a got status "up" within wampes.
i can successfully attach for example /dev/ttypf, but this is
- so i think - more for non-ip connectivity.
so what to do now ? do i have to setup any public domain
ppp-driver for serials lines ? or should it be slip ? as
only speaking about slip in wampes-docu.
would be nice to give me any information for next steps
i have to do.
best regards from vienna
hans
oe1smc
oe1xya
p.s.: linux users will maybe use the ax.25 kernel, but this is
not available on solaris ( sun-os 5.5 )
Read previous mail | Read next mail
| |
