| |
G8MNY > RX 10.03.03 17:19l 23 Lines 868 Bytes #999 (0) @ WW
BID : 50585_GB7CIP
Read: GUEST DO5FHS
Subj: Bearcat UNIDEN XL100 Scanner?
Path: DB0FHN<DB0ZWI<DB0HST<ON0DXC<WA7V<WB0TAX<W4JAX<VK4TUB<EA5RQ<CT2GWY<
IK6PYS<VK3TE<GB7YFS<GB7COV<GB7COV<GB7CIP
Sent: 030308/1522Z @:GB7CIP.#32.GBR.EU #:50585 [Caterham] $:50585_GB7CIP
From: G8MNY@GB7CIP.#32.GBR.EU
To : RX@WW
Hi & thanks for reading. I am looking for info on this old handheld scanner.
It seems to work after I sorted out the battey connections. But there is
something I don't undertand about the power up remembered channels, 4 of them
are out of range the model. However testing with a signal generator 3 of these
work OK, but U can't step up/down from these only overwrite the memory with
frequencys.
eg 66-88MHz 118-174MHz & 406-512MHz (Advertized was 405-512)
Power up frequiencies 30.050 (not working)
40.480 OK
49.900 OK
87.450 OK
So if you have any idea way it sould be doing this I would like to hear from
you. Also if you have any proper instructions eg hw to use the search limit &
hold keys as these seem illogical.
73 de G8MNY @ GB7CIP
Read previous mail | Read next mail
| |
