| |
VK7AX > UIVIEW 04.10.09 08:51l 332 Lines 9722 Bytes #999 (0) @ WW
BID : VK7AX0410GD
Read: GUEST
Subj: [ui-view] Digest Number 4972
Path: DB0FHN<DB0RGB<DB0MRW<DB0FOR<DB0SIF<HB9EAS<DB0ZAV<CX2SA<VK7AX
Sent: 091004/0628Z @:VK7AX.#ULV.TAS.AUS.OC #:12242 [Ulverstone] FBB7.00g $:VK7A
From: VK7AX@VK7AX.#ULV.TAS.AUS.OC
To : UIVIEW@WW
There are 8 messages in this issue.
Topics in this digest:
1a. Re: error 380 after install
From: Keith VE7GDH
1b. Re: error 380 after install
From: Ed L Locklear
1c. Re: error 380 after install
From: John K9IJ
1d. Re: error 380 after install
From: Keith VE7GDH
1e. Re: error 380 after install
From: Stephen H. Smith
2a. Re: d710 as a digi w/ui-view
From: Jerry Belden
2b. Re: d710 as a digi w/ui-view
From: Stephen H. Smith
2c. Re: d710 as a digi w/ui-view
From: Keith VE7GDH
Messages
________________________________________________________________________
1a. Re: error 380 after install
Posted by: "Keith VE7GDH" ve7gdh(AT)yahoo.com ve7gdh
Date: Wed Sep 23, 2009 8:06 am ((PDT))
Ken W0HKR wrote...
> > I have tried serval times to install the latest version of vi-view32
> > and get the error 380 "invalid Property value at marker 27.
Do you have the font MS Sans Serif installed on your computer?
73 es cul - Keith VE7GDH
--
Messages in this topic (6)
________________________________________________________________________
1b. Re: error 380 after install
Posted by: "Ed L Locklear" kf4chg(AT)gmail.com kf4chg
Date: Wed Sep 23, 2009 11:39 am ((PDT))
On Wed, Sep 23, 2009 at 11:04 AM, Keith VE7GDH <ve7gdh(AT)yahoo.com> wrote:
> > Ken W0HKR wrote...
> >
>> >> I have tried serval times to install the latest version of vi-view32
>> >> and get the error 380 "invalid Property value at marker 27.
> >
> > Do you have the font MS Sans Serif installed on your computer?
> >
> > 73 es cul - Keith VE7GDH
> > --
Keith,
Would you elaborate more on the MS Sans Serif font? What effect does
it have on UI-View32 with or without having it installed?
I've never encountered this problem myself.
Thanks,
Ed, KF4CHG
Messages in this topic (6)
________________________________________________________________________
1c. Re: error 380 after install
Posted by: "John K9IJ" john(AT)k9ij.net k9ij
Date: Wed Sep 23, 2009 3:43 pm ((PDT))
At 08:35 PM 9/22/2009, you wrote:
> >Help I have tryed serval times to install the latest version of
> >vi-view32 and get the error 380 "invalid Property value at marker 27.
> >
> >I have done the unistall as stated in here and else where and made
> >sure all files and folders were deleted. still get the same on installing
> >
> >Have p4 2.4 gig with 512 ram and win xp sp3 and all updates. How do
> >I get this sofeware to install. can't even get to the reg box to
> >ender reg info.
Another possibility is that the registry has become corrupt in
regards to fonts. Couple of possible fixes.
One is to get a copy of C/C Cleaner, which is a free PC cleanup
tool. One of the things it does is to clean out crap from the
registry. It's possible that some other program, at one time, has
screwed up a font pointer and C/C might find it and fix it.
Another possibility is TweakUI. This is a Microsoft tool set which,
among other things, includes a font folder repair tool.
John - K9IJ
-
John Rice K9IJ
john(AT)k9ij.net
Webmaster, Network Admin, Janitor
Messages in this topic (6)
________________________________________________________________________
1d. Re: error 380 after install
Posted by: "Keith VE7GDH" ve7gdh(AT)yahoo.com ve7gdh
Date: Wed Sep 23, 2009 10:07 pm ((PDT))
Ed KF4CHG wrote...
> > Would you elaborate more on the MS Sans Serif font? What effect does
> > it have on UI-View32 with or without having it installed? I've never
> > encountered this problem myself.
I searched the archives for "error 380 invalid Property value at marker
27" and found references to the problem being related to the system that
UI-View was installed on not having that font. Did W0HKR reply? I
couldn't find a response.
I just checked my uiview32.ini and found in the [SETUP] section...
LABEL_FONTNAME=MS Sans Serif
73 es cul - Keith VE7GDH
--
Messages in this topic (6)
________________________________________________________________________
1e. Re: error 380 after install
Posted by: "Stephen H. Smith" wa8lmf(AT)aol.com edacs450
Date: Wed Sep 23, 2009 10:18 pm ((PDT))
Keith VE7GDH wrote:
> > Ed KF4CHG wrote...
> >
> >
>> >> Would you elaborate more on the MS Sans Serif font? What effect does
>> >> it have on UI-View32 with or without having it installed? I've never
>> >> encountered this problem myself.
>> >>
> >
> > I searched the archives for "error 380 invalid Property value at marker
> > 27" and found references to the problem being related to the system that
> > UI-View was installed on not having that font. Did W0HKR reply? I
> > couldn't find a response.
> >
> > I just checked my uiview32.ini and found in the [SETUP] section...
> >
> > LABEL_FONTNAME=MS Sans Serif
> >
> > 73 es cul - Keith VE7GDH
> > --
It would be strange if this font were missing -- it's been "factory
standard" in Windows since the 16-bit Windows 3.1 introduced scalable
TrueType fonts around 1992.
I suppose some buggy program UNinstaller could have deleted it, or
perhaps someone went on a system cleaning "rampage" with a buggy utility
that falsely removed it.
------------------------------------------------------------------------
--
Stephen H. Smith wa8lmf (at) aol.com
EchoLink Node: WA8LMF or 14400 [Think bottom of the 2M band]
Skype: WA8LMF
Home Page: http://wa8lmf.net
NEW! HF APRS Notes & Guide
http://wa8lmf.net/aprs/HF_APRS_Notes.htm
"APRS 101" Explanation of APRS Path Selection & Digipeating
http://wa8lmf.net/DigiPaths
Updated "Rev H" APRS http://wa8lmf.net/aprs
Symbols Set for UI-View,
UIpoint and APRSplus:
Messages in this topic (6)
________________________________________________________________________
________________________________________________________________________
2a. Re: d710 as a digi w/ui-view
Posted by: "Jerry Belden" jerry_belden(AT)yahoo.com jerry_belden
Date: Wed Sep 23, 2009 5:16 pm ((PDT))
Keith Iam not sure what I mean . All Iam trying to do is to use my 710 runing ui-view to be a digi when we do public service.Any help doing this would be great. thanks Jerry
________________________________
From: Keith VE7GDH <ve7gdh(AT)yahoo.com>
To: ui-view(AT)yahoogroups.com
Sent: Friday, September 18, 2009 6:35:28 PM
Subject: Re: [ui-view] d710 as a digi w/ui-view
Jerry N2FSD wrote...
> > Anybody out there using a tm-d710 and ui-view as a digi ? If you are
> > can I have a copy of the cmd file that you are using?
It won't do you much good. The TNC must be in KISS mode (unless you are
using AGWPE or BPQ mode) for the UI-View digi to be operational. If you
use the CMD file from the files area on the Yahoo support group, the TNC
would not be in KISS mode... or did you mean for the D710 to be the digi
while also using it with UI-View?
73 es cul - Keith VE7GDH
--
Messages in this topic (5)
________________________________________________________________________
2b. Re: d710 as a digi w/ui-view
Posted by: "Stephen H. Smith" wa8lmf(AT)aol.com edacs450
Date: Wed Sep 23, 2009 6:18 pm ((PDT))
Jerry Belden wrote:
> > Keith Iam not sure what I mean . All Iam trying to do is to use my 710 runing ui-view to be a digi when we do public service.Any help doing this would be great. thanks Jerry
> >
> >
> >
Digipeater operation requires direct access to the incoming raw packets,
since they need to be disassembled, modified (i.e. WIDEn-N values
changed) and then re-assembled for retransmission. The only way UIview
can have full and unfettered access to raw packets is if the TNC
(either the one inside the D710 or an external one) is being accessed in
KISS mode.
[KISS mode bypasses the TNC's internal firmware and makes the TNC act
essentially as a dumb modem under complete control of the computer program.]
------------------------------------------------------------------------
--
Stephen H. Smith wa8lmf (at) aol.com
EchoLink Node: WA8LMF or 14400 [Think bottom of the 2M band]
Skype: WA8LMF
Home Page: http://wa8lmf.net
NEW! HF APRS Notes & Guide
http://wa8lmf.net/aprs/HF_APRS_Notes.htm
"APRS 101" Explanation of APRS Path Selection & Digipeating
http://wa8lmf.net/DigiPaths
Updated "Rev H" APRS http://wa8lmf.net/aprs
Symbols Set for UI-View,
UIpoint and APRSplus:
Messages in this topic (5)
________________________________________________________________________
2c. Re: d710 as a digi w/ui-view
Posted by: "Keith VE7GDH" ve7gdh(AT)yahoo.com ve7gdh
Date: Thu Sep 24, 2009 12:11 am ((PDT))
Jerry N2FSD wrote...
> > I am not sure what I mean. All I am trying to do is to use my 710
> > running UI-View to be a digi when we do public service.
If you want UI-View to be the digi, then you would need the TNC to be in
KISS mode. UI-View doesn't use the CMD files when KISS mode is used.
Don't forget... operators of UI-View based digis in North America should
edit the [DIGI_OPTIONS] section of uiview32.ini to bring it up-to-date.
UIFLOOD=SS <<< use the 2 letter abbreviation for your state
UITRACE=WIDE
Of course, if it is to be a fill-in digi, you could just add an alias of
WIDE1-1 instead.
73 es cul - Keith VE7GDH
--
Messages in this topic (5)
**********************************************************************
ABOVE IS A CROSS POST TO THE PACKET RADIO NETWORK IN AN EFFORT TO
PROMOTE FURTHER INTEREST IN THE UIVIEW PROGRAM, APRS AND PACKET RADIO
Courtesy Tony VK7AX VK7AX(AT)VK7AX.#ULV.TAS.AUS.OC
**********************************************************************
Read previous mail | Read next mail
| |
