| |
VK7AX > UIVIEW 24.09.09 09:20l 117 Lines 3707 Bytes #999 (0) @ WW
BID : VK7AX2409ZQ
Read: GUEST
Subj: [ui-view] Digest Number 4968
Path: DB0FHN<DB0FOR<DB0SIF<HB9EAS<OK0NHD<OK0NMA<OK0NAG<IK6ZDE<IK2XDE<IZ3LSV<
IQ3GO<SR1BSZ<WA7V<VK7AX
Sent: 090924/0712Z @:VK7AX.#ULV.TAS.AUS.OC #:11456 [Ulverstone] FBB7.00g $:VK7A
From: VK7AX@VK7AX.#ULV.TAS.AUS.OC
To : UIVIEW@WW
There are 3 messages in this issue.
Topics in this digest:
1a. Re: UI-View32 Tinytrak4 USB to serial adaptor no packets in monitor
From: Keith VE7GDH
1b. Re: UI-View32 Tinytrak4 USB to serial adaptor no packets in monitor
From: Keith VE7GDH
2. UI-View32 Tinytrak4 USB to serial adaptor no packets in monitor wind
From: Alan P. Biddle
Messages
________________________________________________________________________
1a. Re: UI-View32 Tinytrak4 USB to serial adaptor no packets in monitor
Posted by: "Keith VE7GDH" ve7gdh(AT)yahoo.com ve7gdh
Date: Sat Sep 19, 2009 5:50 am ((PDT))
dchristensen70 (callsign?) wrote...
> > I have for about a month been trying to get my Tinytrak4 to work with
> > UI-View32 on a Vista 32 PC with a serial to USB converter. The
> > communication looks OK with Putty and Teraterm but UI-View will
> > beacon OK but not receive any other traffic (radio settings OK as
> > verified by the terminal program)
Are you running UI-View "as administrator"?
> > I can not use a Kantronics KPC-3 in either host mode or KISS mode as
> > it also doesn't return any RF traffic. In host mode UI-View states
> > that it is not getting the expected responses from the commands.
If you can't even get UI-View to talk to a KPC3 the problem is likely
not "TT4-specific". The strange thing is you say the TT4 and the KPC3
work fine in a terminal program.
> > Why won't UI-View, Vista-32, and the USB Serial all get along
> > together? Any clues.
If you can communicate with the TT4 and KPC3 in a terminal program, the
problem isn't likely because of the USB to serial adapter.
Check the com port settings in UI-View... correct com port, 8 data bits,
1 stop bit, no parity and the "baud" rate. In the case of the KPC3,
select KISS and SETUP and click on KAN. Does the TT4 need any
commands to put it in KISS mode? My understanding is that you load
the KISS firmware ahead of time. however, if you can't even get the
KPC3 going...
73 es cul - Keith VE7GDH
--
Messages in this topic (5)
________________________________________________________________________
1b. Re: UI-View32 Tinytrak4 USB to serial adaptor no packets in monitor
Posted by: "Keith VE7GDH" ve7gdh(AT)yahoo.com ve7gdh
Date: Sat Sep 19, 2009 5:51 am ((PDT))
Bob WB4APR wrote...
> > Could it be that the TT4 can only be "commanded" into a command mode
> > for a second or so after power-up. Beyond that very brief window, once
> > it goes to operate mode, (to my knowledge) there is no "break" string
> > to get back to command mode. Thus, UI-View cannot do any kind of 2-way
> > "setup" unless it hits that tiny window?
Don't forget that dchristensen70 said he can't even get a KPC3 going in
UI-View. I don't think he has a TT4 specific problem.
73 es cul - Keith VE7GDH
--
Messages in this topic (5)
________________________________________________________________________
________________________________________________________________________
2. UI-View32 Tinytrak4 USB to serial adaptor no packets in monitor wind
Posted by: "Alan P. Biddle" APBIDDLE(AT)MAILAPS.ORG alanbiddle70
Date: Sat Sep 19, 2009 6:46 am ((PDT))
Are you using the basic KISS firmware, or the new alpha multifunction
firmware?
Alan
WA4SCA
Messages in this topic (1)
**********************************************************************
ABOVE IS A CROSS POST TO THE PACKET RADIO NETWORK IN AN EFFORT TO
PROMOTE FURTHER INTEREST IN THE UIVIEW PROGRAM, APRS AND PACKET RADIO
Courtesy Tony VK7AX VK7AX(AT)VK7AX.#ULV.TAS.AUS.OC
**********************************************************************
Read previous mail | Read next mail
| |
