| |
VK7AX > UIVIEW 22.01.08 08:32l 161 Lines 5218 Bytes #999 (0) @ WW
BID : VK7AX-2201XE
Read: GUEST
Subj: [ui-view] Digest Number 4384
Path: DB0FHN<DB0MRW<DB0FSG<I4UKI<IQ5KG<IQ0LT<SP7MGD<SR1BSZ<IV3SCP<IR2UBX<
IR2UBX<IK2XDE<ON4HU<F4BWT<F4DUR<CX2SA<SV1CMG<VK3AYM<VK4TRS<VK3HEG<
VK7NW
Sent: 080122/0432Z @:VK7NW.#ULV.TAS.AUS.OC #:36088 [NWTARIG] FBB7.00g $:VK7AX-2
From: VK7AX@VK7NW.#ULV.TAS.AUS.OC
To : UIVIEW@VKNET
There are 3 messages in this issue.
Topics in this digest:
1. Laptop freezes or slows down
From: Fred (VE3FAL)
2a. Re: Dropping packets
From: Phillip Conza
3a. Re: NWSGet downloads
From: ratfortman
Messages
________________________________________________________________________
1. Laptop freezes or slows down
Posted by: "Fred (VE3FAL)" flesnick@tbaytel.net ve3fal
Date: Thu Jan 17, 2008 11:46 am ((PST))
Gang:
I am trying to set up my laptop for use with my rig for portable use for
ARES and FD etc.
I have a new Dell Inspiron 1501 with AMD Athlon 64(x2) dual core
1 meg of ram and 120GB hd.
I am using a Signalink SL-1 to the computer using the microphone and speaker
jacks on the computer.
On receive for APRS and PSK etc it works flawlessly, but on transmit I think
I am getting maybe some RF back through the cables (they are shielded
cables).
Anyone else have this issue and any way around it like maybe filters between
the jacks and plugs on computer.
Thanks
Fred
VE3FAL
DEC Amethyst ARES
3.750 Northwest ARES Net Manager Thunder Bay,Ontario
---
Messages in this topic (1)
________________________________________________________________________
________________________________________________________________________
2a. Re: Dropping packets
Posted by: "Phillip Conza" zl2tze@yahoo.com.au zl2tze
Date: Thu Jan 17, 2008 11:46 am ((PST))
Hi Chris,
There is as far as i am aware no place to go to check your
setup, everyone has a similar setup but there are always differneces.
You are best to work with your neighbours on this.
I use FINDU and the other servers to check stations but this only
tell you if you are getting heard and also some error checking.
As to the Green/red indicators :
When you connect to an Internet server these 6 green indicators
appear, The top row is for frames other than local messages, the
bottom row is for local messages. In each row one indicators is for
each time period.They will turn red if the limit for the time period
is exceeded. The Statistics window shows how many frames your system
has gated and how many have been dropped because the limits were
exceeded
Check your Inet_TO_RF_LIMITS ( IGATE.INI file set them to default
as per the help file decreasing the numbers in the 1st block is not
advisable.
73 Phillip
ZL2TZE
--- In ui-view@yahoogroups.com, Francis Bumgarner <rctor10@...>
wrote:
> >
> > Phillip
> > Is there a place I can go to see if the set for my UI-View32 is
correct, Please advise...
> >
> >
> > ----- Original Message ----
> > From: Phillip Conza <zl2tze@...>
> > To: ui-view@yahoogroups.com
> > Sent: Tuesday, January 15, 2008 11:50:09 AM
> > Subject: [ui-view] Re: Dropping packets
> >
> > Hi Chris,
> > Its up to your friend to make sure he has his APRS setup
> > set correctly to beacon via a digi so it makes it back to an Igate
> > you will be able to track him that way.
> >
> > Your friend should have his setup as per the new paradigim WIDEN-n
> >
> > Also don't put to much in the red indicators, after a time they
> > should decrease and go green.
> >
> > You say your friend is going to Florida and you want to track him,
> > increasing your range to 75 miles will only allow stations within
> > your 75 miles to be seen, you are in Canada so its going to be a
> > case of using Igates to get your friends postion back to you.
> >
> > How many stations does your list show after 10 minutes ?
> > How many red indicators do you have after 10 minutes of being
> > connected to the APRS server ?
> >
> > I have all the Users in NZ on my map and 1 red indicator comes on
> > everynow and then on the top line nothing to worry about.
> >
> > 73 Phillip
> > ZL2TZE
Messages in this topic (13)
________________________________________________________________________
________________________________________________________________________
3a. Re: NWSGet downloads
Posted by: "ratfortman" rwb9fiu@mac.com ratfortman
Date: Fri Jan 18, 2008 3:37 am ((PST))
--- In ui-view@yahoogroups.com, "Robbie, wa9inf" <mwrobertson@...>
wrote:
> >
(snip)
> >
> > 73, let us know what you find wrong..
> >
*** i shut it all down and got the tray icon info to match the IND
NOR 01 thats in the underlay control panel list. I briefly saw the
option for looping and clicked it,but cant see any looping action.
I think it is better than it was,and i will keep tinkering with it.
Im learning more and more about it the more i play with it and read
the help over.
Thanks Robbie
73
Rusty
Messages in this topic (4)
________________________________________________________________________
________________________________________________________________________
Please see <http://www.apritch.myby.co.uk/uiv32.htm> for UI-View registration information.
Precision Mapping version 8 works with UI-View32; the necessary additional PMapServer7 is available for download at <http://www.ui-view.org>.
At <http://wa8lmf.net/aprs/UIview_Notes.htm>, you will find useful hints and info for your UI-View setup and use.
------------------------------------------------------------------------
Read previous mail | Read next mail
| |
