|
OM9ALZ > TSTH 25.04.00 14:37l 84 Lines 3052 Bytes #999 (0) @ EU
BID : 5712_OM9ALZ
Read: GUEST
Subj: AGW/Flexnet missing info?
Path: DB0AAB<DB0SL<DB0RGB<DB0MRW<OK0PKL<OK0PPR<OK0PHL<OK0PBB<OK0PAB<OM0PBL
Sent: 000425/1217Z @:OM0PBL.#SSL.SVK.EU #:34097 [L.Mikulas-JN99TB] FBB7.00g25
From: OM9ALZ@OM0PBL.#SSL.SVK.EU
To : TSTH@EU
*** An incoming message from OM9ALZ ***
# Generated by: TstHWin v2.21b - Registered to OM9ALZ
# On : 22.04.2000 08:12:00
# UTC: 22.04.2000 07:12:00
I am using TSTHwin with the AGW packet driver and find that often, not
all the data makes it from the local Flexnet nodes. There is a difference
between what is displayed in TSTHwin in the connect window and in the
monitor window. The following is an example of this:
===== CONNECT WINDOW =====
*** connected to OE3XLR
RMNC/FlexNet V3.3h * Netzknoten OE3XLR Muckenkogel * JN77TX * Traisnerhuette *
User: Port2: 144.950 * Port1: 430.650 +7,6 * Port9: 430.800 +7,6 * Box:OE3XBS
[MH] [H]elp -->
=>31 OM0NZB 14-14 554 OM0NZL 0-4 720 OM0PBB 0-0 303
OM0PBC 0-15 967 OM0PBL 0-0 745 OM0PBM 0-15 272 OM0PBZ 0-15 554
OM0PDM 0-15 263 OM0PDX 0-0 282 OM0PPX 0-0 554 OM3KGQ 0-15 534
OM3RAL 0-4 348
=>link setup...
*** connected to OM0NZL
lm.sk
=>
====== MONITOR WINDOW ===== (edited to show only my packets)
0:fm OM0NVA to OM9ALZ-8 ctl I pid F0 len=230
0:fm OM9ALZ-15 to OM0NVA-2 ctl I pid F0 len=005
d om
0:fm OM0NVA to OM9ALZ-8 ctl I pid F0 len=230
0:fm OM0NVA-2 to OM9ALZ-15 ctl RR
0:fm OM0NVA-2 to OM9ALZ-15 ctl I pid F0 len=256
DB0HOM 0-15 444 OE2XOM 0-10 41 OM0NNA 0-12 436 OM0NNK 0-15 192
OM0NVB 0-13 234 OM0NVB 15-15 464 OM0NWA 0-12 805 OM0NWA 13-15 859
OM0NWB 0-15 945 OM0NXA 0-12 277 OM0NZA 0-15 315 OM0NZB 0-7 526
OM0NZB 13-13 5
0:fm OM0NVA-2 to OM9ALZ-15 ctl I pid F0 len=247
31 OM0NZB 14-14 554 OM0NZL 0-4 720 OM0PBB 0-0 303
OM0PBC 0-15 967 OM0PBL 0-0 745 OM0PBM 0-15 272 OM0PBZ 0-15 554
OM0PDM 0-15 263 OM0PDX 0-0 282 OM0PPX 0-0 554 OM3KGQ 0-15 534
OM3RAL 0-4 348
=>
0:fm OM0NVA to OM9ALZ-8 ctl I pid F0 len=230
0:fm OM0NVA to OM9ALZ-8 ctl RR
0:fm OM9ALZ-15 to OM0NVA-2 ctl I pid F0 len=009
c om0nzl
0:fm OM0NVA-2 to OM9ALZ-15 ctl RR
0:fm OM0NVA-2 to OM9ALZ-15 ctl I pid F0 len=013
link setup...
0:fm OM0NVA-2 to OM9ALZ-15 ctl I pid F0 len=025
*** connected to OM0NZL
0:fm OM0NVA-2 to OM9ALZ-15 ctl I pid F0 len=256
PC/FlexNet V3.3g þþþ O M 0 N Z L * LIPTOVSKY MIKULAS * JN99TB * SLOVAKIA
TCP/IP WWW server OM0PBL-11 dostupny z Internetu: http://om0pbl.valm.sk
(M)ailbox: OM0PBL
telnet om0pbl.valm.sk ftp://om0pbl.va
0:fm OM0NVA-2 to OM9ALZ-15 ctl I pid F0 len=009
lm.sk
=>
===== END =====
All the information is shown in the monitor screen, but not all of it makes
it to the connect screen. Is this a problem with the combination of
TSTHwin and AGW, with the combination of AGW and Flexnet, or other? I did
not have this problem when using PC/Flexnet drivers for TSTHwin, but prefer
AGW for the full WIN95 compatibility.
Any information or help would be appreciated.
Best 73 de Daniel - OM9ALZ@OM0PBL.#SSL.SVK.EU - JN88nd - Bratislava
E-mail: plett@mail.com
Web Page: http://www.qsl.net/om9alz
Read previous mail | Read next mail
| |