| |
PE1MHO > TSTH 24.02.99 14:11l 161 Lines 6700 Bytes #999 (0) @ EU
BID : 7802_PE1MHO
Read: GUEST
Subj: TstHWin v2.20a now available!
Path: OE1XAB<OE3XPR<OM0PBM<OM0PBB<OK0PJI<OK0PPR<OK0PKL<DB0MAK<DB0ERF<DB0MW<
DB0AIS<DB0IZ<DB0QS<DB0ACC<DB0SM<PI8DAZ
Sent: 990224/0913Z @:PI8DAZ.#TWE.NLD.EU #:28745 [Hengelo] FBB7.00g $:7802_PE1MH
From: PE1MHO@PI8DAZ.#TWE.NLD.EU
To : TSTH@EU
PE1MHO = G7ECN TstHWin English editor AX25 PE1MHO@PI8DAZ.#TWE.NLD.EU
NCI #1412 G-QRP #2543 I-QRP #162 QRP-ARCI #6962
# Generated by: TstHWin v2.20a - Registered to PE1MHO
# On : 99/02/24 10:17:56
# UTC: 99/02/24 09:17:56
Hi there!
Just a quickie to let you know that the latest version of TstHWin (v2.20a)
has been released.
http://www.r-j.it/servizi/hp/ik1gkj/ik1gkjuk.html
Here's the update info:
============================================================================
TstHWin updates
============================================================================
Version 1.00
- First beta release
Version 1.10
- Fixed some little bugs reported
- Main tsthwin window is now resizable
- Possibility to choose your preferred font
- Added separated permanent monitor window
- Added address book for mail addressing
- Added macros book for macro selection/execution
Version 1.20
- Fixed some minor bugs reported
- Insert icon to shutdown tsthwin
- Insert icon to disconnect station
- You may now choose color in rx window
- Added internall management for 7plus send out
- Permanent monitor window now remember "stay on top" status
- Added internal mheard, for tncs whose doesn't have that function
- Added launch of "shutdown.bat" file at tsthwin shutdown time
- Added maker in unproto list manager
- Added possibility to read rline in ppms message reader
Version 1.30
- Fix bug in merging unproto list
- Added support for dos device driver (as beta)
- Add button to ask selected message directly in unproto manager
- Add button to ask forward directly in pms manager
- Now can set font type for command line too
- New font conversion command AnsiConvert
- Different sounds for connect/disconnect events
- New command Ax25 ExitChannel, leave tnc channels open on exit
Version 1.31
- Fixed bug in UTC time and message composer.
- The tnc operations is now displayed using a modem icon instead
of Idle, Send, Receive words.
- To avoid confusions, in unproto resync query is now displayed
the number you asking for in clear form
- 7plus transmission can be hourly divided.
- Tsthwin log files are now written in mountly separated files,
for example 02_1998.LOG
- I have added the capability to decode the flexnet password
for sysop node operations
- Fine tuning capability for serial port activity, read about the
commands CHMARKER and CHFRAME
- Added command CTRL-P in pms manager menu, to directly print
the selected messages.
- Added the possibility to choose the preferred font in pms and
unproto list manager.
- Added a preselected common filters selection box in pms and
unproto list manager.
Version 2.00
- PmsManager ed UnprotoListManager list can now be sorted by field
- Unproto List Manager show message status with graphical simbols
- New command YTIMEOUT 120....3600
- You can start review buffer pressing PG-UP
- Automatically detection and usage of help and language file,
read the appropriate section in the on-line manual
- New command PPMS MYNAME
Version 2.10
- fixed bug in unproto list selection: in multiple selection, if a
marker was preset in the selection, after the process all messages
was marked.
- fix bug on log and connect/disconnect message for fwd/unproto
process, the language used was always the English even if the
local country language was existent.
- Fixed multiport tnc beacn, finally the beacon exit on all port.
- Fixed a problem on tx line editor: wron word-wrap occours if the
line was ended with more than a space
- New command ULIST INTERFACE, to set the port where the unproto
query must be emitted.
- New interface dde to pass received data to external programs
- Added support to read HTML messages, require MS Internet Explorer
4.0 and above intalled
- New command PPMS HTMLAUTO
Version 2.11
- As always, Murhpy law is working hi. This release fix a very little
bugs: i have noticed that internal 7plus routines write the header
of 7plus in long filename formats... to avoid problem during
7plus recompilation, now the filename is always writtem in short
filename dos format.
- This is only a security patch: if internet explorer is not found
in the system, the htmlauto command has no effect... this ensure
that you tsthwin will not show warning windows when you try to read
html messages with htmlauto on, and you don't have internet explorer
installed on your system.
Version 2.20
- Resource manager and notepad buttons in main tsthwin screen removed,
to make room for the new button interface. Only the buttons was
removed, you can always start the related functions with the
shotcut keys, respectively ALT-F7 and ALT-F8
- Added new buttons interface windows 98 compliant.
- In html and message viewer windows, added buttons to directly
read previus and next message and to reply to the message.
- Added a message box querying for Yes/No when you press the exit
button only.
- Added first heard time in the mheard list, the list is now
sorted based on the last heard time
- New command MALERT, to monitoring the presence on the air up to 20
callsign. It sound the file SYSTEM\MALERT.WAV
- New command TOPMESSAGE, act as ENDMESSAGE, but is always placed on
the top of the message. Default search in SYSTEM directory, OFF to
close.
- Added capability to select messages also by title contents. This
improvement is referred to the commands PPMS SAVEMSG,ULIST NOT,
ULIST AUTOSELECT
Version 2.20a
This version should be considered as an upgrade to 2.20 rather than a new
release, because it only adds a few improvements and fix a little bug.
- MALERT command... now tsthwin will look for CALL.WAV, end if not
found, the standard malert.wav file will be sound.
- In the message composer window, there are two checkbox, to enable
tsthwin to add or not the topmessage and endmessage file to the
current message.
- In the message viewer, a button to directly delete the message was
added
- Pressing NEXT and PREV buttons in the message viewer window, the
text of the message was displayed at the bottom of the mail insted
of top, fixed
- With html pages, under some circustances the background color was
not rightly displayed, fixed.
- Again in html messages, it was possible that some messages was not
recognized as html, fixed.
- The file selection window is replaced with the standard win95
dialog box.
- Added support for multiple declarations in tsthwin.prt
--------------------------------------------------------------------------
73, Pete
Read previous mail | Read next mail
| |
