| |
VK2VL > TSTH 10.04.98 14:08l 51 Lines 1224 Bytes #999 (0) @ WW
BID : 490-VK2VL
Read: GUEST
Subj: TSTHOST Problem...
Path: OE1XAB<OE3XZR<OE3XSR<DB0WGS<OE5XBL<DB0RGB<OK0PPL<OK0PHL<SP6KBL<SR6DOP<
SO9ODC<SR3KWX<SP9YZT<KA3FMO<WB0TAX<SV1AAW<IW9EXL<IK3GET<IW3GRX<IW3FPP<
IV3CJT<IK4ICZ<IK6RUY<IK6PYS<KP4IG<XE3DX<EA7FZV<EA8AOP<EA4PO<EA7MU<
EA7VA<PU1AKA<KE4HSB<KE4HSB<VK4ATV<VK4ZZ<VK4RAT<VK4XUK<VK4FIL<VK5RQ<
VK2GA<VK2XBR<VK2XY<VK2XTH
Sent: 980323/0611Z @:VK2XTH.NSW.AUS.OC #:34571 [Jervis Bay] FBB5.15c $:490-VK2V
From: VK2VL@VK2XTH.NSW.AUS.OC
To : TSTH@VKNET
[¯¯¯ TST HOST 1.43b, UTC diff:-10, Local time: Mon Mar 23 08:36:52 1998 ®®®]
Thankyou for reading this bulletin...
I have a small problem in starting TSTHOST 1.43b....when calling the
program for a first time it goes into QUIKMENU but does not activate KISS
mode.
If I then "exit" from TSTHOST and call it again from the menu it into
TSTHOST with KISS mode ON. This is a little annoying to say the least.
In other words I have to enter TSTH twice in order to activate KISS mode.
This was not always so but seems to have developed since I upgraded to Ver.
1.43b.
I am using a PacComm Tiny-2 Mk2 TNC and TFKiss30 in my Tsthost.bat startup
file.
Has anyone struck this problem, and found a solution. If so I would like to
hear from you.
de Theo VK2VL @ VK2XTH
ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
º Best 73 - From THEO º
º PBBS - VK2VL @ VK2XTH.NSW.AUS.OC º
ºMollymook Beach.NSW. Loc:QF55FQ º
ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ
* Message forwarded automatically by TSTHOST - 1.43B *
Read previous mail | Read next mail
| |
