| |
ZL2VAL > TPK 24.01.04 21:16l 41 Lines 1263 Bytes #999 (0) @ WW
BID : 1B0438ZL2VAL
Read: DB0FHN GUEST
Subj: Re: Time zone setting...How?
Path: DB0FHN<DB0FOR<DB0MRW<DB0ERF<DB0FBB<DB0GOS<DB0EEO<DB0RES<ON0BEL<7M3TJZ<
ZL2TZE<ZL2AB
Sent: 040124/1906Z @:ZL2AB.#46.NZL.OC #:33977 [New Plymouth] FBB7.00g
From: ZL2VAL@ZL2AB.#46.NZL.OC
To : TPK@WW
>
> Hello all TPK users,
> I use TPK ver 1.83D here and would like to be able to
have > the time set to UTC while I'm runnig TPK. I see in one of the help files
that
> somewhere you can have a timezone setting such as TZ=FRA-2.5 but there is
> no mention of the file that this goes in. Can anyone help please?
>
> I suppose I could knock up a simple programme to do this but I'll take the
> easy path if there is one.
Normally, this line goes into the AUTOEXEC.BAT file, but it ain't set in
concrete.. You could put it into the top, or second, line of the BAT file
used to call TPK. Then again at the bottom, just before the line which calls
your menu S/w to revert it back to normal. The line should be as follows:
SET TZ=UTC0 to set the timezone to UTC
TPK
SET TZ=EAST-10 to set the timezone back to Eastern Australia Standard Time
Should work?
=========================
73 de Alan, (Sysop ZL2AB).
AX25:ZL2VAL@ZL2AB.#46.NZL.OC
APRS:!3903.34S/17406.45E]
IP :zl2val@qsl.net
Message timed: 08:08 on 2004-Jan-25 (NZ local)
Message sent using WinPack-AGW V6.80
Points to ponder
~~~~~~~~~~~~~~~~
The hardness of the butter is proportional to the softness of the bread.
Read previous mail | Read next mail
| |
