| |
ZR2JR > TPK 11.02.98 20:25l 84 Lines 2772 Bytes #-10272 (0) @ WW
BID : 1131_ZR2JR
Read: GUEST
Subj: RE MESG FAILURE...
Path: DB0AAB<DB0SL<DB0RGB<OK0PPL<OK0PHL<OK0PBB<OK0PAB<PU3AKM<PP5BLU<KA0WIN<
WB0TAX<W4DPH<KO4SX<ZS2CX<ZS0ELD
Sent: 980210/0601Z @:ZS0ELD.ELD.ECP.ZAF.AF #:4459 [E.L.] FBB5.15c $:1131_ZR2JR
From: ZR2JR@ZS0ELD.ELD.ECP.ZAF.AF
To : TPK@WWW
ZR2JR/TPK 1.83b Msg #:1131 Date:10-02-98 Time:7:57Z
HI TO ALL TPK USERS.....
I AM USING VER 1.83B AND HAVE THE FOLLOWING PROBLEM,WHICH OCCURS.
WHEN TPK CONNECTS TO MY LOCAL BBS AND SOMEONE ELSE WHO IS CLOSER ALSO
CONNECTS TO THE BBS,MY SYSTEM THEN CANNOT RECEIVE ANY DATA BACK FROM THE
BBS.THIS RESULTS IN MY SYSTEM DISCONNECTING AFTER IT TIMES OUT.
IF I AM OUT OF THE SHACK AND COME IN,EVERYTHING LOOKS NORMAL ON THE CONSOL
SCREEN.BUT AS SOON AS I PRESS A KEY ON THE KEYBOARD,THE WHOLE SCREEN GOES
RED AND TPK LOOSES ITS MESG NUMBER ORDER.IN OTHER WORDS WHEN I GO INTO THE
MESG SCREEN TO SEND A MESG,THE NUMBER REVERTS BACK TO 1......
IF I WAS ON MESG NUMBER 2000,THEN I HAVE TO RESEND ALL 2000 MESGS(ONLY A
BLANK BODY,AND CALLSIGN)TO MY SELF.TPK WILL THEN PICK UP AFTER MESG 2000
AND CARRY ON AS USUAL.
CAN ANY ONE PSE ADVISE AS TO WHAT THE PROBLEM MIGHT BE.
BELOW IS THE FILE USED TO ACCESS OUR LOCAL BBS.
# Created by ZS2GWK @ ZS0ELD.ECPB.ZAF.AF and ZS6ANW @ ZS0KLK.TVL.ZAF.AF #
#-----------------------------------------------------------------------#
# Example of an automatic connection to BBS - ZS0ELD to run MAKELIST #
#-----------------------------------------------------------------------#
# File changed by ZR2JR@ZS0ELD.ELD.ECP.ZAF.AF AUGUST 1997.
# ***** Note ***** Change the ZS0ELD for your own BBS callsign.*********
#
# There are a number of extra <CR> (carriage returns)[^M] inserted in the
# file. I suggest that you leave them there as your switching between
# Transparent and convers mode may be slow and these will make up for it.
# The first line is to call the BBS.
C ZS0ELD
# Wait 30 seconds for the connection or abort the program.
ATT 30 CNX^M
# Wait for the BBS prompt ">" If the prompt arrives within 40 seconds
# then the following command is dealt with without further delay.
^7ATT 40 >
# Next command is is an Alt-S followed by 8 Ctrl-H characters which are
# "back2space" characters that erase the default extention of the CAPTURE
# DIR filename TEMP.TPK, it then inserts ZS0ELD as required by MAKELIST
#
^7ATT 10
#
@S^H^H^H^H^H^H^H^HZS0ELD
^7ATT 5
# Next command is to list files in the reverse order with the "LR" command
#
LR
# Again wait for the BBS Prompt this time for 900 seconds (enough time to
# recieve all your messages)
^7ATT 900 ZS0ELD BBS (H for help) >
#
^7ATT 5
#
# And finally a b (BYE) to correctly exit from the BBS.
B
# Wait 10 seconds for the disconnect or abandon the program.
^7att 10 DCNX
# Instruct TPK to run Makelist.
/MAKELIST ZS0ELD
#
# Connect to the BBS if there are any tagged or private messages by
# executing the CALLBBS file.
FOR E
#
# END OF FILE
THANKS TO ALL
DE ZR2JR
JOHN
ZR2JR@ZS0ELD.ELD.ECP.ZAF.AF
/ACK
Read previous mail | Read next mail
| |
