| |
ZL4CW > TPK 12.03.97 16:10l 43 Lines 1325 Bytes #-10634 (0) @ WW
BID : 440_ZL4CW
Read: GUEST
Subj: TPK 1.83 mail tagging.
Path: DB0AAB<DB0AHO<DB0KFB<DB0KCP<DB0ULM<DB0LX<DB0RBS<DB0SEL<DB0ZDF<DB0HOM<
LX0PAC<ON7RC<ON4AWP<ON1CED<ON4KTK<F8KOT<F5MJS<F1HPZ<ON4MOU<SV1BKN<
ZL2TZE<ZL2TZE<ZL2WA<ZL4AA<ZL4TAY
Sent: 970310/2136Z @:ZL4TAY.#95.NZL.OC #:52547 Bluff 5.15c $:440_ZL4CW
From: ZL4CW@ZL4TAY.#95.NZL.OC
To : TPK@WW
ZL4CW/TPK 1.83 Msg #:440 Date:11-03-97 Time:10:29Z
Hi all, I had a look through the french instructions "Lisezmoi". I cant'
read french, but I noticed at the end there was an interesting addition to
the BR command as follows;
BR <BBS> RXMSG|RJMSG BBS <ROUTE/BBS> etc.
If you put your BBS in between the BR and RXMSG in the CONFIG.TPK file
then "tagging" will take place.
It looks like this *might* be required for all the BR commands, like;
BR <BBS> RXMSG PRIV
as well as
BR <BBS> RXMSG 7PLUS DECODE
Not sure why the "#" gets stripped from the address, perhaps it is
redundant. Maybe my addressing problem was tied up in the BR <BBS> RXMSG
PRIV command not having the BBS inserted in it. Time will tell.
The above will probably explain why there are so many OPs having problems
with mail "tagging", downloading 7 PLUS files, and in my case private mail
problems. Time will tell.
ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
º73 de Geo. ZL4CW @ ZL4TAY.#95.NZL.OCº
º TPK 1.83 º
ÌÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍËÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͹
º Invercargill º New Zealand º
ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÊÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ
/QSL
Read previous mail | Read next mail
| |
