| |
VK4BDJ > TPK 07.02.97 09:30l 78 Lines 2919 Bytes #-10880 (0) @ WW
BID : 507-VK4BDJ
Read: VK3EUB GUEST
Subj: CP VK4BDJ: Re: TFX ENGLISH DOCS
Path: DB0AAB<DB0PV<DB0WGS<DB0RGB<DB0MAK<DB0HOT<DB0LPZ<DB0MER<DB0NHM<DB0SIF<
DB0AIS<DB0NDK<DB0ACH<DB0YAB<DB0NOS<DB0EA<DB0ACC<PI8DRS<PI8DAZ<PI8GCB<
PI8WFL<PI8MBQ<PI8HGL<PI8VNW<PE0MAR<KE4GAJ<KA0WIN<KE4HSB<VK4ATV<VK4ZZ<
VK4RAT
Sent: 970204/2125Z @:VK4RAT.#NQ.QLD.AUS.OC #:15295 QH30JP $:507-VK4BDJ
From: VK4BDJ@VK4RAT.#NQ.QLD.AUS.OC
To : TPK@WW
Original from VK4BDJ to TFX@WW
[¯¯¯ TST HOST 1.43b, UTC diff:-10, Local time: Wed Feb 05 07:34:20 1997 ®®®]
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ START OF ORIGINAL MESSAGE ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
[¯¯¯ TST HOST 1.43b, UTC diff:-10, Local time: Wed Feb 05 07:08:49 1997 ®®®]
Hi ----tnx for your message re the eng docs for TFX.at the moment there
doesent seem to be any.here is a HELP file which i have written up so that
anyone who wants to use TFX can get started.i am using it with TSTHOST and
one of the other hams is using it with TPK.
hope this helps.dont hesitate to ask any questions.
Hi All
This file is to help those who cant read German and wish to use TFX with a
Baycom Modem and a terminal program like TSTHOST,TPK or a program that
would use the TFPCX driver.
TFX takes the place of TFPCX,uses 90% less interrupts and is therefore
faster on d/l and u/l with a lot less REJ's.
When you d/l TFX28.ZIP and unzip it you are presented with a number of .COM
programs.
TFX_UART is the one that replaces TFPCX as the Baycom Modem driver.
Copy this into the same directory that you have the main .EXE file of the
terminal program that you are using eg. TSTHOST where the tsthost.exe file
is.
In the batch file used to start the Driver and Terminal program replace the
TFPCX line with TFX_UART -C:2 (the number is the serial port that the
modem is on)
yes thats it,very simple.
The batch file i use to start TSTHOST looks like this :-
@ECHO OFF
TFX_UART -C:2
TSTHOST /t /i253
TFX_UART -U
if you are using Shroom before TSTHOST the commands are the same.
NOTE 1. When using TSTHOST * DO NOT * use the /s switch that makes the
Baycom Modem use the bells.if you do the bells become very lllloooonnnggg.
In the TSTHOST.CFG file set EBELL to 22 or the number of options that you
want the bell to ring on. (see the docs)
NOTE 2. TFX_UART -U is the command to uninstall the driver when exiting
from the Terminal Program.
NOTE 3. DO NOT USE A H/D CACHE PROGRAM eg.SMARTDRV etc.this causes problems
when you exit the terminal program and it saves the unproto list.it may not
save it or only part of it and may even corrupt it.
Hope this works as well for you as it does for me.Any queries,problems or
ideas may be addressed to me DAVID VK4BDJ@VK4RAT.
___________________________________________________________________________
+
+ 73's from David Qth,Black River,North of Townsville,Queensland,Australia
+ Packet Address,VK4BDJ@VK4RAT.#NQ.QLD.AUS.OC
___________________________________________________________________________
___________________________________________________________________________
+
+ 73's from David Qth,Black River,North of Townsville,Queensland,Australia
+ Packet Address,VK4BDJ@VK4RAT.#NQ.QLD.AUS.OC
___________________________________________________________________________
Read previous mail | Read next mail
| |