OpenBCM V1.13 (Linux)

Packet Radio Mailbox

DB0FHN

[JN59NK Nuernberg]

 Login: GUEST





  
VK2IAQ > TPK      20.05.96 23:11l 51 Lines 2706 Bytes #-11142 (0) @ WW
BID : 552_VK2IAQ
Read: IN3GRK GUEST
Subj: Auto message problem KPC9612/TPK1.82
Path: DB0AAB<DB0PV<DB0WGS<DB0RGB<DB0ABH<DB0SRS<DB0ZDF<DB0GV<DB0SIF<DB0NHM<
      DB0EWB<DB0HB<DB0OQ<DB0HRO<OZ4BOX<OZ3BOS<OZ7PAC<OZ3BUL<OZ3BOD<SK6FV<
      SK7YX<SK7QJ<SK7BK<SM7DLZ<VK2GJB<VK2DAA<VK2GDM<VK2XY<VK2XBR<VK2TGB<
      VK2CZR
Sent: 960519/0335Z @:VK2CZR.#SYD.NSW.AUS.OC #:55968 [St Clair] 5.15c $:552_VK2I
From: VK2IAQ@VK2CZR.#SYD.NSW.AUS.OC
To  : TPK@WW

VK2IAQ/TPK 1.82 Msg #:552  Date:19-05-96  Time:3:26Z

  G'day all, Ian here in Sydney.
  
          I have a small problem with TPK1.82, running with a KPC9612 TNC. If
  I  leave  the system running with 8BITCONV ON in the TNC and 8 bits enabled
  in  TPK,  the  KPC9612 will interpret all received chars and if the correct
  combination  for  changing  IO streams arrives, the KPC will go right ahead
  and  change  the  stream!! This can mean that the next time an auto forward
  period  comes  around,  the TNC tries to connect to my local 1200 Bd 2m BBS
  using  9k6  on 70cm, which of course doesn't work, as well as looking a bit
  silly...
  
             This problem seems to be solved by leaving the TNC with 8BITCONV
  OFF,    but  I  now  find  that uploads to the BBS won't work, as FBB sends
  its  "received correctly" byte in the hex $FA-$FF range, which the TNC then
  converts to $7A-$7F for some reason, and the upload fails. I don't know why
  it does this, as the sign-on graphic from the BBS comes up OK on the screen
  on  connection,  and it uses characters like ุืฺ and the like. I am running
  the  connections  in  TRANS  mode, and 8BITCONV shouldn't come into play in
  TRANS mode, as I understand it.
  
                  Is there a way to modify the connect sequence in TPK to set
  8BITCONV  ON  when the connection is made, then set 8BITCONV OFF again when
  TPK  disconnects.  This  needs  to  happen  for  uploads only, downloads of
  message from the BBS   are all fine. I know the BR VK2CZR C VK2CZR line can
  be modified to, say, BR VK2CZR C VK2CZR^M^78BITCONV ON^M, which is fine for
  the  connection  stage, but after a message upload, how can 8BITCONV OFF be
  sent  automatically  to  the TNC? Or is there another way around this?? Are
  there any other KPC9612 + TPK1.82 users out there with the same trouble??
  
  Cheers for now!
  
                      73s from Ian  VK2IAQ@VK2CZR.#SYD.NSW.AUS.OC
  
  

    ษอออออออออออออออออออออออออออออออออออออออออออออออออออออออออออออออออออออออป
    บ    73s from Ian Chennell                                     VK2IAQ   บ
    บ    QTH: Bowen Mountain  New South Wales  AUSTRALIA           QF56IK   บ
    บ    PACKET: VK2IAQ@VK2CZR.#SYD.NSW.AUS.OC                 TPK  V1.82   บ
    บ  INTERNET: vk2iaq@k2cc.sos.clarkson.edu                               บ
    บ                                                                       บ
    บ                       Sent at 13:37 on 19/05/96                       บ
    บ         24 hours in a day and 24 beers in a case.  Hmmmm.....         บ
    ศอออออออออออออออออออออออออออออออออออออออออออออออออออออออออออออออออออออออผ


Read previous mail | Read next mail


 22.11.2026 22:04:56lGo back Go up