| |
ZS2GK > TPK 04.05.96 02:14l 34 Lines 1491 Bytes #-11159 (0) @ WW
BID : 286_ZS2GK
Read: DH1FBK DL5MHK GUEST
Subj: 486-TPK-PROBLEMS
Path: DB0AAB<DB0KCP<DB0CZ<DB0LX<DB0RBS<DB0HOM<DB0ZDF<DB0AIS<DB0NDK<DB0ACH<
ON4RAT<DB0ACC<DB0SM<PI8DAZ<PI8APD<PI8GCB<PI8MBQ<PI8VNW<PI8VAD<PI8HWB<
ON6AR<F6CNB<WB0TAX<N0QCU<KT0H<N0RSE<ZS2FP<ZS2GK
Sent: 03-05-96/06:53 Z (+2H=SAST) @ ZS2GK.ECP.ZAF.AF [Bathurst] #:286 TPK v1.82
Greetings to all you TPK users,
A short while ago I put out a Bulletin about a READ/WRITE problem that I
was having with TPK and my 486 computer, in that, as soon as it attempted
to write to disk during a compressed forward receive, it would disconnect
from the sending station (in my case via a digipeater) after 500 bytes.
The problem was: In most of the newer Motherboards the I/O controller is
on board or some of it is. My Motherboard had its own HDD controller but
needed an I/O card for the Serial ports. I fitted an Enhanced IDE card for
the Stiffy Drive and the serial ports as I also attach a 28,800 data modem
for the Internet. There seemed to be a conflict between the I/O card and
the on board HDD controller (Windows95 did not see the conflicts) I then
re-enabled the HDD controller section on the card, disabled the on-board
HDD controller......and the problem was solved, all is working as it should
be.
I hope that this "Help" will be of help to anyone else who has a similar
problem in the future.....it drove me and my BBS SysOp "nuts".
浜様様様様様様様様様様様様様様様様様様様様様様様様様様様様様融
� 旭臼臆栩 73 de Glenn, ZS2GK @ ZS2FP.ECP.ZAF.AF 栩臆臼旭 �
藩様様様様様様様様様様様様様様様様様様様様様様様様様様様様様夕
INTERNET ADDRESS : glenn.kraut@digitec.co.za
glennwk@iafrica.com
� SERVERS : � TPK73-ACK � TPK-ACK � RUBRIK � INFO � SERVINFO �
Read previous mail | Read next mail
| |