OpenBCM V1.13 (Linux)

Packet Radio Mailbox

DB0FHN

[JN59NK Nuernberg]

 Login: GUEST





  
G8MNY  > TECH     26.09.12 08:29l 79 Lines 3366 Bytes #999 (0) @ WW
BID : 60377_GB7CIP
Read: DD3IA DK3UZ GUEST OE7FMI
Subj: Broadband 6el Yagi for Band 2
Path: DB0FHN<DB0FOR<DB0MRW<DB0ERF<IZ3LSV<IW0QNL<ON4HU<CX2SA<ZS0MEE<GB7CIP
Sent: 120926/0032Z @:GB7CIP.#32.GBR.EU #:60377 [Caterham Surrey GBR] $:60377_GB
From: G8MNY@GB7CIP.#32.GBR.EU
To  : TECH@WW

By G8MNY                          (New Sep 12)
(8 Bit ASCII graphics use code page 437 or 850, Terminal Font)
The community radio station I put on, is too far to hear at my home really, so
I needed a good aerial. I designed this one from a well engineered but very
old scrap Band 2 aerial as a starting point using the free MMANA-GAL aerial
design software.

I wanted it to do well over the whole 20MHz of Band 2, but this caused a real
compromise in the preformance!

All the elements use 10mm dia tube.

     ____________________1698mm
        Distance 326cm

98mm-旼컴컴컴컴컴컴컴컴커1292mm                        _  ~10dB
    -읕컴컴컴훟o컴컴컴컴�2x731mm                      / \   F/B
       Distance 186mm                          Back  �   �
      컴컴컴컴컴컴컴컴컴                       lobe   \./
                                                    .-~ ~-.
        Distance 713mm                             /       \ 
                                                  �         �
       컴컴컴컴컴컴컴컴 1228mm                   �           �
                                                  �  Front  �
        Distance 716mm                             \ Lobe  /
                                                    '-._.-'
        컴컴컴컴컴컴컴 1166mm                           +8dBd

        Distance 715mm

         컴컴컴컴컴컴 1041mm

SWR 300�
  4�                                Matching the approx 300� balaced to 75�
   �                                75� coax was done using a tiny 4mm VHF
  3�\                          �    ferrite ring with the centre tap of 6
   � \                        /     turns to the braid.
  2�  \                      /                        __()))))__Ant
   �   '-.______         _.-'                      Ant  �  �___
  1�            ~~~~~~~~~                               읕o)coax
  87.5  92.75  97.5  102.5 107.5MHz                         ~~~~

R �                                    X �
400�                __                 200�
   �            .-~'  ~-.                 �
300�         .-~         \             100�      _...._
   �      .-~             \               �  .�'~      '�.
200�   .-~                 '.            0�.'             \         /
   �.-~                      .            �                '�._ _.�'
100�                          .       -100�                    ~
  87.5  92.75  97.5  102.5 107.5MHz      87.5  92.75  97.5  102.5 107.5MHz

GAIN dBd                               F/B dB
 10�                          /         15�_                        _
   �                         /            � -.                  _.-'
  9�                       .'         12.5�   '�.           _.-'
   �                   _.-'               �      '-..__..-'~
  8�~-.           _.�'~                 10�
   �   '---....-�'                        �
  7�                                   7.5�
  87.5  92.75  97.5  102.5 107.5MHz      87.5  92.75  97.5  102.5 107.5MHz

IN USE
This works well 75� SWR was quite flat as above. But now regret I did not
designed it to be a spot frequency narrow band 1MHz wide aerial, as that would
give 2-3dB more gain & > 22dB F/B ratio. The back of the beam QRM is the main
problem I have! :-(


See TECH Bul "FM Stereo Radio Principles"


Why Don't U send an interesting bul?

73 de John G8MNY @ GB7CIP


Read previous mail | Read next mail


 28.09.2026 06:18:31lGo back Go up