OpenBCM V1.07b12 (Linux)

Packet Radio Mailbox

DB0FHN

[JN59NK Nuernberg]

 Login: GUEST





  
VK3EUB > FERRIT   12.10.06 04:32l 24 Lines 750 Bytes #999 (0) @ WW
BID : 361_VK3EUB
Read: GUEST DL1LCA OE7FMI
Subj: Re: Best way to "cut" ferrite
Path: DB0FHN<DB0RGB<OK0PPL<OK0PKL<OK0PCC<OK0NAG<LZ4NY<DB0RES<ON0BEL<LA2MV<
      N2BQF<VK3FIS
Sent: 061012/1722Z @:VK3FIS.#MEL.VIC.AUS.OC #:12405 [Rye] $:361_VK3EUB
From: VK3EUB@VK3FIS.#MEL.VIC.AUS.OC
To  : FERRIT@WW

VK3EUB/TPK 1.83e Msg #:361  Local Date: 12-10-2006  Time: 1:14 PM  (03:14 UTC)

From: VK3EUB@VK3FIS.#MEL.VIC.AUS.OC
TO  : FERRIT@WW

The last time i had to cut a ferrite rod i used a ceramic tile saw,
the saw is a stiff wire rod about 13cm long and cuts a slot about
2mm wide, i don't know what the abrasive coating the rod is.

Brian  

>I have not had time to put the suggestions to the test, however at
>the moment the most popular suggestion is to file a notch around the
>rod and then snap it.
>
>                    ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿
>                    ³ ®®®  73 de Andy G0FTD@GB7PZT  ¯¯¯ ³
>                    ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ
>
>G0FTD @ GB7PZT


Read previous mail | Read next mail


 17.03.2025 10:58:51lGo back Go up