| |
G8MNY > TECH 29.08.06 18:04l 47 Lines 1931 Bytes #999 (0) @ WW
BID : 44230_GB7CIP
Read: DL1LCA DL1RX GUEST OE7FMI
Subj: Logic Probe
Path: DB0FHN<DB0RGB<DB0MRW<OK0PPL<DB0RES<ON0AR<GB7CIP
Sent: 060829/0740Z @:GB7CIP.#32.GBR.EU #:44230 [Caterham] $:44230_GB7CIP
From: G8MNY@GB7CIP.#32.GBR.EU
To : TECH@WW
By G8MNY (Updated Nov 04)
(8 Bit ASCII Graphics use code page 437 or 850)
Although you can buy a commercial probe, here is one I designed to fit a probe
case I had.
Specification.
Supply 0 & +5V @ 10mA to 0 & +12V @ 25mA
Input Z > 15k
Logic 0 0v to 1V
Logic 1 Supply less 1V
Single full level pulse detection >10MHz.
T1 PNP ÚÄÄÄÂÄÄÄÄÄÄÄÄÂÄÄÄÄÄÂÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÂÄÄ< +ve
³/e _³_ HI _³_ ³ ³ ³
ÚÄÄ´<ÃÄÄ´ \_/>LED /_\ ³ 390 ³
³ ³\ ³ > ³ ³/e ³ ³
³ ÃÄÄÄÁÄÄÄÄ´ÃÄÄÁÄÄÄ´ T3 _³_PULSE ³
27k ³ 10n ³\ PNP \_/>LED ³
³ ³ ³ ³ > ³+
Probe <ÄÄÄ´ 390 100k ³ ===
³ ³ ³ ÚÄÄÄ´ ³ 10u
27k ³ 10n ³ ³/ ³ ³
³ ÃÄÄÄÂÄÄÄÄ´ÃÄÄÂÄÄÄÄÄÁÄÄ´ ³+ ³
³ ³/ _³_ _³_ T4 ³\e === ³
ÀÄÄ´>ÃÄÄ´ \_/>LOW /_\ NPN ³ ³4u7 ³
³\e ³ >LED ³ ³ ³ ³
T2 NPN ÀÄÄÄÁÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÁÄÄÄÁÄÄÄÄÄÄÄÄÁÄÄ< -ve
Circuit Description.
Both power rail transistors TR1 & TR2 are normally on, shorting out the HI &
LOW indicating LED unless the probe is within 1V of ground or +ve rail. When
that occurs the shorting transistor across the LED is tuned off & the
appropriate logic 1 or 0 LED lights.
Pulses of Logic 0 from TR2 feed through the 10nF cap to diode detector to turn
on T4 with the pulses. TR4 discharges a 4u7 Cap to hold on the pulse indicator
LED. Pulses only of logic 1 from TR1 do the same for TR3, which turns on T4 to
light the LED as before.
Why Don't U send an interesting bul?
73 de John G8MNY @ GB7CIP
Read previous mail | Read next mail
| |
