| |
VK2ZRG > TECH 05.06.06 07:41l 27 Lines 749 Bytes #999 (0) @ WW
BID : 2532_VK2ZRG
Read: DL1LCA GUEST
Subj: Re: Identify thread
Path: DB0FHN<DB0FOR<DB0MRW<DK0WUE<I0TVL<VK2TGB
Sent: 060605/0501Z @:VK2TGB.#SYD.NSW.AUS.OC #:29124 [Valley heights] FBB7.00i
From: VK2ZRG@VK2TGB.#SYD.NSW.AUS.OC
To : TECH@WW
VK2ZRG/TPK 1.83d Msg #:2532 Date:05-06-06 Time:5:48Z
From Dick G4BBH
>
>I Have a very nice old telescopic whip 2M long with an unknown thread.
>This whip is 25 years old and well made.
>The thread is overall diameter 6.95mm and pitch exactly 1 thread per
>1mm.
>Is this a standard metric 7mm thread?
There are two listings of this metric thread in my Machinery's Handbook,
1951 printing. 7mm might not be a "standard" these days, but I've seen
such threads some years ago, and seem to remember that I've got a 7mm tap,
or die, somewhere around the place.
73s from Ralph VK2ZRG@VK2WI.#SYD.NSW.AUS.OC
Taglines by Colin Coker G4FCN
C Program run, C Program Crash...ReWrite in Pascal!
Read previous mail | Read next mail
| |
