| |
VK8PDG > TECH 03.01.06 10:27l 40 Lines 875 Bytes #999 (0) @ WW
BID : 1847_VK8PDG
Read: DL1LCA GUEST OE7FMI
Subj: Rascal for Echolink
Path: DB0FHN<DB0RGB<OK0PPL<DB0RES<DK0WUE<7M3TJZ<UA6ADV<9K2EC<VK8PDG
Sent: 060102/1222z @:VK8PDG.PLM.#NT.AUS.OC [AirMail 3.0.868] Z:0830 $:1847_VK8P
Date: 10 Oct 2005 06:26:32 -0000
To: TECH@WW
Hello All.
Thank you for reading this posting concerning tips for the FT857-D in
setting up of the Rascal for an Echolink node
I assume you're using a Yeasu FT857-D.
Have you checked your volume and record controls for your sound card?
Also there's a level adjustment on the Rascal.
Do you need to make any menu adjustments on the FT857-D
Attached is the Echolink Troubleshooter utility. Good luck.
---------------------------------------------------------------
My sysop settings are:
RX Control
VOX
VOX Delay- 1000 ms
Anti Thump- 500 ms
Clr Freq Delay- 3000ms
TX Control
ASCI Serial
COM 1
Also, you can download and run the Echolink Troubleshooter at
http://www.echolink.org/el/troubleshooter.htm
I've used this before and it works very well in troubleshooting problems
and how to fix them.
Good luck.
Stu N3PZT
Read previous mail | Read next mail
| |
