|
G8MNY > TECH 03.09.05 19:20l 57 Lines 2927 Bytes #999 (0) @ WW
BID : 60569_GB7CIP
Read: GUEST DL1LCA OE7FMI
Subj: LM380N/TDA2003 IC Audio Amps
Path: DB0FHN<DB0MRW<OK0PKL<OK0PPL<DB0RES<ON0AR<GB7CIP
Sent: 050903/1712Z @:GB7CIP.#32.GBR.EU #:60569 [Caterham] $:60569_GB7CIP
From: G8MNY@GB7CIP.#32.GBR.EU
To : TECH@WW
From: VE2ACT@VE2TOY.#MTL.QC.CAN.NOA (new Nov 04)
AUDIO PREAMP. avec IC LM 380N
10uF ÚÄÄo<ÄÄoÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄo+
oÄÄ||ÄÄÄ¿ ³ 200 ÚÄÄÄÄÄÄÄÄ¿ 9v.
² ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄ¿ uF ³²²²²²²²²³ o-
Mic. 25k ²<ÄÄÄÄ´2 14 8ÃÄÄÄ||ÄÄÄ´²²²²²²²²³ ³
input ² ³ IC LM 380N ³ ³speaker ³ ³
³ ³6 ³ ÀÄÄÄÄÂÄÄÄÙ ³
oÄÄÄÄÄÄÄ´ ³ 1 3 4 5 7 9 10 11 12 ³ ³ ³
³ ÀÄÄÂÄÄÂÄÄÂÄÄÂÄÄÂÄÄÂÄÄÄÂÄÄÄÂÄÄÄÂÄÙ ³ ³
³ ³ ÀÄÄÁÄÄÁÄÄÁÄÂÁÄÄÄÁÄÄÄÁÄÄÄÙ ³ ³
³ .01 === ³ ³ ³
ÀÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÙ
======================================================================
de VE2ACT..........MONTREAL en packet.....janv04..(D55 audioamp.asc)
-------------------------------------------------------------------------------
G8MNY Comments: Idealy a large C across the supply to help stability & reduce
battery supply dips on peak 1/2 cycles. For hify use the LS C should be 1000uF.
-------------------------------------------------------------------------------
Here is one using a TDA2003
Sensitivity
40mV >60Kê ÚÄÄÄÄÄÄÄÄÂÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄ<+8-18V 0.5A ÚÄÄÄÄÄ¿
oÄÄÄÄ¿ ³ u1 === === 1000uF ³ 0 ³
VolÚÁ¿ + 1³`\³5 _³_ _³_- ÃÄÄÄÄÄ´
Pot³ ³<ÄÄ´ÃÄÄÄÄ´+ \ 4 ³ ³
100K³ ³ 10uF ³ `>ÄÄÄÂÄÄÄÂÄÄÄÄ´ÃÄÄÄÄÄÂÄÄo LS ÀÂÂÂÂÂÙ
LogÀÂÙ ÚÄÄÄ´- /' ÚÁ¿ ÚÁ¿ +1000uF ³ 7W Music/ ³2³4³
³ ³ 2³,/³3 100³ ³ ³ ³ ÚÁ¿ 3.5W RMS into 1 3 5
³ ³+ ³ ÀÂÙ ÀÂÙ470 1³ ³ 4ê LS @ 18V
³ ÃÄ´ÃÄÄÄ)ÄÄÄÄÄÄ(ÄÄÄ´ ÀÂÙ 0.05% dist
³ ³470uF ³ 8n2 ³ ÚÁ¿ ³ 20Hz-20KHz (-3dB)
³ ÀÄÄÄÄÄÄ)ÄÄ´ÃÄÄÙ ³ ³4R7 === 86dB S/N
³ ³ ÀÂÙ 0.1uF ÃÄÄo LS
oÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÁÄÄ<-
HOW IT WORKS
The input Z of the IC is 150K so with the 100K pot this is approx 60K depending
on the slider position. The IC power is well decoupled at LF with the 1000uF &
@ HF with the u1 cap. Gain setting NFB is in 2 parts, the basic gain of 100x by
the 470/4R7, & the HF cut with to 20x by 100/4R7 & 8n2 for stability. Also for
stability is the Zobal network of 1ê & u1 across the LS to keep the O/P stage
terminated into a load at HF, as high IC gain with loads of NFB give very low
distortion, but poor HF stability!
Why Don't U send an interesting bul?
73 de John G8MNY @ GB7CIP
Read previous mail | Read next mail
| |