| |
G8MNY > TECH 16.07.05 23:09l 52 Lines 2192 Bytes #999 (0) @ WW
BID : 54536_GB7CIP
Read: GUEST OE7FMI
Subj: 1A Float/charging Pb Acid Batt
Path: DB0FHN<DB0CL<DB0PDF<DB0SM<DB0EA<DB0RES<ON0AR<ZL2BAU<VK6HGR<GB7YFS<
GB7CIP
Sent: 050716/1331Z @:GB7CIP.#32.GBR.EU #:54536 [Caterham] $:54536_GB7CIP
From: G8MNY@GB7CIP.#32.GBR.EU
To : TECH@WW
By G8MNY (New Mar 05)
Here are 2 simply circuits for small discharge current batteries.
1/ On Insulated Heatsink
in ÚÄÄÄÄÄÄÄ¿out 1N4001
+24V >ÄÄÂÄÄÄÄÄÄÄÄÄ´ 7805 ÃÄÄÄÄÂÄÄÄÂÄÄÄÄÂÄÄ´>ÃÄÂÄÄ> +14.5V BOOST
³ ÀÄÄÄÂÄÄÄÙ ³ e\³ 22K ³ +13.5V NORMAL
RAW DC >2200u³+ com_³_ ³ PNPÃÄÄÁÄÄ10KÄÙ
FROM 30V=== /_\` u1³ /³
BRIDGE ³ NORMAL____³ 9.1v === ³ Battery being
RECTIFIER ³ BOOST O _³_ ³ 1K floated/charged
& 17V AC ³ \o \_/ 0.5V ³ _³_-> Charge
@ 1.5A ³ ³ _³_ ³ \_/-> LED
³ ³ \_/ 0.5v ³ ³
0V >ÄÄÄÄÄÁÄÄÄÄÄÄÄÄÁÄÄÄÄÁÄÄÄÄÄÄÄÄÁÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄ>0v
Voltage set by Zener + Reg - O/P diode loss. 13.5v recommended for floating Gel
& sealed types. 13.8 for wet ones tha can be topped up. 14.5v for charging
after discharge but not left on that voltage.
Current is limited to a peak of 1A. With no I/P smoothing C there will be hum
on the charging current & the battery voltage may not be suitable for floating
with electronic loads.
2/ Add a series R in the common leg. Most makes of regulator put about 50uA
constant current down the common leg, so a small R can uplift the voltage.
On Insulated Heatsink
in ÚÄÄÄÄÄÄÄ¿out 1N4001
+22V >ÄÄÄÂÄÄÄÄÄÄ´ 7812 ÃÄÄÂÄÄÄÄÄÄÄ´>ÃÄÄÄ>
RAW DC ³ ÀÄÄÄÂÄÄÄÙ ³
FROM >2200u³+ com³ u1³
BRIDGE 30V=== Multi 10K === Variable O/P
RECTIFIER ³ Turn ³ ³ Voltage
³ ³ ³
³ ³ ³
³ ³ ³
0V >ÄÄÄÁÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄ>
I have used this one for many years to float my paket station on a 5AH gel cell
battery. Via a fused lead it powers a PacCom TNC220, a FT290Ri, & 30W PA, peak
Tx current 8A, Rx 500mA leaving just 500mA to charge for the short packet Tx
time.
Why Don't U send an interesting bul?
73 De John, G8MNY @ GB7CIP
Read previous mail | Read next mail
| |
