|
G8MNY > TECH 17.07.04 22:30l 44 Lines 1824 Bytes #999 (0) @ WW
BID : 1579_GB7CIP
Read: GUEST
Subj: DC/RF Sensing PA Switching
Path: DB0FHN<DB0THA<DB0ERF<DB0FBB<DB0GOS<DB0EEO<DB0RES<ON0AR<GB7CIP
Sent: 040717/2110Z @:GB7CIP.#32.GBR.EU #:1579 [Caterham] $:1579_GB7CIP
From: G8MNY@GB7CIP.#32.GBR.EU
To : TECH@WW
By G8MNY (Graphics updated Dec 03)
For PA with RF/DC sense switching (as some rigs put out DC on Tx), that used a
diode to detect any +ve signals (RF/DC) on the transceiver to operate the PA
PTT system....
The time constants are ok for SSB & FM, but 22uF can be omitted for FM only.
TR1 & 2 BC107 etc, TR3 a TIP type PNP, D1 rf diode 1N4148 etc, D2 1N4001.
HOW IT WORKS
D1 detects RF & passes any DC to turn on TR1. TR1 turning on charges up the
22uF & makes TR3 initially conduct to give fast Tx attack. When 22uF is over
2V TR2 is turned on & passes higher base current into TR3 via a Tx LED ensuring
it is well turned on. The 150K +ve feedback ensure snap action.
External PTT earth can be put in/out on TR2 collector.
1n
RigÄÂÄÄÄÄÂÄÄ´ÃÄÄÄÄ> RF to Drive Relay
³ ³
100K _³_
³ \_/D1 ___________+12-24V
³ ³ ³/e
³ ³ ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄ´ TR3
³ ³ ³ ³ ³\
³ ³ ³ Ext oÄÄ¿ 330 ³
³ 22K ³/ PTT ³ LED ³ ÃÄÄÄÄÄÄÄÄÄÄ Drive, O/P
³ ÃÄÄÄÄ´ TR1 ÃÄÄÄÄ´<ÃÄÄÙ ³ Power & Fan
³ ³ ³\e ³/ ³ Relays
³ === ÃÄÄ47KÄÂÄÄÄÄ´ TR2 ³
³ ³10n ³+ ³ ³\e ³
³ ³ === ÃÄÄÄÄÄÄ)ÄÄÄÄ150KÄÄÄÄÄÄÄÄ´
³ ³ ³22u ³ ³ ÄÁÄ
³ ³ ³ 10K ³ /_\ D2
³ ³ ³ ³ ³ ³
ÄÁÄÄÄÄÁÄÄÄÄÄÄÁÄÄÄÄÄÄÁÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄ
I have found it was heat sensitive, due to the sensitivity of the 1st NPN.
/QSL
73 De John, G8MNY @ GB7CIP
Read previous mail | Read next mail
| |