| |
VK4XAC > CHIP 14.04.04 00:38l 35 Lines 1058 Bytes #999 (0) @ WW
BID : 130026VK4XAC
Read: GUEST OE7FMI
Subj: PK88 Chip Z8530A required
Path: DB0FHN<DB0RGB<DB0MRW<DB0ERF<DB0FBB<DB0GOS<DB0EEO<DB0RES<ON0BEL<W1NGL<
UA0SNV<VK4TRS<VK4DGQ<VK4WIE
Sent: 040413/2232Z @:VK4WIE.#BNE.QLD.AUS.OC #:8050 [Brisbane] FBB7.00g
From: VK4XAC@VK4WIE.#BNE.QLD.AUS.OC
To : CHIP@WW
Hello and thanks for reading this Packet.
This is sent via a borrowed PK88 as my one has gone U/S. My problem is the
Z8530a, RS232 port chip, IC12, on the PK88 schematic.
I am trying to source a couple of Z8530a chips for my PK88. One to replace
one as a spare.
This type, Z8530a, is specific as it works at 6MHz. Others of the same
number, but different designator, work at different speeds and are not
compatable, so I am told. If you have had any experience with other
compatable chips in the PK88, I would like to hear your story.
I have found only one place on the net, but I have to order in 20 or 50
lots. Too many.
Does anyone have a few in their box that are spare or know of a source via
the net, where I can order 2 - 5 units???
Thanks again, Look forward to your reply,
Cheers and 73 from Alan (Al) Connew
Brisbane, Australia.
PACKET:- VK4XAC @ VK4WIE.#BNE.QLD.AUS.OC
EMAIL :- alan2912@tpg.com.au
Message timed: 08:05 on 14 Apr 2004
Message sent using WinPack V5.5 (Freeware!)
Read previous mail | Read next mail
| |
