|
VK3EUB > TECH 22.09.03 14:52l 40 Lines 1012 Bytes #999 (0) @ WW
BID : 64_VK3EUB
Read: DB0FHN GUEST OE7FMI
Subj: Re: Pwer Supply Fan Mod
Path: DB0FHN<DB0RGB<DB0IGL<DB0FSG<DB0PV<DB0MRW<OK0PKL<OK0PCC<OK0NAG<OK0PPL<
DB0RES<ON0AR<VK3TE<VK3SPB<VK3FRC
Sent: 030922/1233Z @:VK3FRC.#MEL.VIC.AUS.OC #:9054 [Famparc] FBB7.00i $:64_VK3E
From: VK3EUB@VK3FRC.#MEL.VIC.AUS.OC
To : TECH@WW
VK3EUB/TPK 1.83e Msg #:64 Date:22-09-2003 Time:22:32 (-10 for UTC)
From: VK3EUB@VK3FRC.#MEL.VIC.AUS.OC
To : TECH@WW
Hi
I could not find any referance to an LM35 in any of my data books,
i thought it may have been a mistake.
Brian.
>From: M1BYT@GB7FCR.#16.GBR.EU
>To : TECH@WW
>
>
>VK3EUB Opined with considerable skill:-
>> From: VK3EUB@VK3FRC.#MEL.VIC.AUS.OC
>> To : TECH@WW
>>
>>
>> This is the circuit from the magazine articale , i think LM35 should
>> read LM335 . The LM311 switches the IRF510 on which shorts out the
>> 68 ohm resistor allowing the fan to run a full speed.
>
>Thanks Brian,
>
>Without checking, I think either the LM335 or the LM35(Z) would work in
>that circuit, the only difference I can see between the two is the
>specified accuracy.
>
> ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
> º 73 from Harry, M1BYT @ GB7FCR.#16.GBR.EU º
> ÌÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͹
Read previous mail | Read next mail
| |