| |
G8MNY > TECH 26.07.03 09:49l 22 Lines 760 Bytes #999 (0) @ WW
BID : 7136_GB7CIP
Read: GUEST DB0FHN OE7FMI
Subj: Bearcat UNIDEN XL100 Scanner?
Path: DB0FHN<DB0RGB<DB0MRW<DB0FOR<DB0SIF<DB0GV<DB0ZDF<DB0LJ<LX0HST<HA3PG<
7M3TJZ<IK1ZNW<GB7CRV<GB7CIP
Sent: 030725/2348Z @:GB7CIP.#32.GBR.EU #:7136 [Caterham] $:7136_GB7CIP
From: G8MNY@GB7CIP.#32.GBR.EU
To : TECH@WW
Hi & thanks for reading. I am looking for info on this old handheld scanner.
It seems to work after I sorted out the battey connections. But there is
something I don't undertand about the power up remembered channels, 4 of them
are out of range the model. However testing with a signal generator 3 of these
work OK, but U can't step up/down from these only overwrite the memory with
frequencys.
eg 66-88MHz 118-174MHz & 406-512MHz (Advertized was 405-512)
Power up frequiencies 30.050 (not working)
40.480 OK
49.900 OK
87.450 OK
So if you have any idea way it sould be doing this I would like to hear from
you.
73 de G8MNY @ GB7CIP
Read previous mail | Read next mail
| |
