| |
SQ9NRF > TECH 30.12.02 03:25l 27 Lines 1249 Bytes #999 (0) @ WW
BID : F10152SQ9NRF
Read: GUEST OE7FMI
Subj: FT-101 Mod for 30-meter 10MHz
Path: DB0MRW<DB0RGB<OK0PPL<RZ6HXA<SP7MGD<SQ5BAQ<SR9ZAA<SR9BKR<SR9BKA
Sent: 021229/2327Z @:SR9BKA.#KAT.POL.EU #:42360 [Katowice] FBB7.00g $:F10152SQ9
From: SQ9NRF@SR9BKA.#KAT.POL.EU
To : TECH@WW
I made several of these mods about ten years ago but I am a little fuzzy.
The FT101 uses 10mhz for its WWV position but they left out the driver and
final coil connections in the transmit section of the radio. So you either
add coils or you can jump the band switch in the driver portion and the
final section.
Connect a jumper from the 20meter driver coil tab, to the WWV driver tab;
and the 40 meter final coil tab to the WWV final tab.
This will make the driver tune in the 40meter position and the final will
dip around the 20meter position.
A cheap mod for another band, Good Luck but remember that packet or rtty
is continious power so you need to back off the drive to about 1/3 normal
or you will cook the finals!!!!!!
*************** SQ9NRF *****************
* op : Pawel *
* tel : 503903082 *
* email: sq9nrf@poczta.fm *
* BBS : SQ9NRF@SR9BKA.#KAT.POL.EU *
* *
*************** VY 73! *****************
Read previous mail | Read next mail
| |
