SQ9NRF > TECH 30.12.02 03:24l 29 Lines 1429 Bytes #999 (0) @ WW
BID : 150151SQ9NRF
Read: GUEST OE7FMI
Subj: Extended frequency Alinco 119t
Path: DB0MRW<DB0MAK<DB0FSG<DB0PV<OE2XOM<OE5XBL<OE3XSR<OK0PBX<OK0PHK<OK0NAG<
OK0PPL<RZ6HXA<SP7MGD<SQ5BAQ<SR9ZAA<SR9BKR<SR9BKA
Sent: 021229/2327Z @:SR9BKA.#KAT.POL.EU #:42359 [Katowice] FBB7.00g $:150151SQ9
From: SQ9NRF@SR9BKA.#KAT.POL.EU
To : TECH@WW
Hi and thanks for reading this message. I have performed the following
mods to the DR-119T.
Once the top cover has been removed there is a large loop of blue wire
behind the tuning dial. This needs to be cut and insulated.
Replace the cover and reset the rig.
(F-key and VFO/M key to be depressed while the rig is turned off and then
on again ) By then using the following key sequence other bands are opened
up. F-key followed by the Mhz -key shifts you into the 300Mhz band.
Coverage here is 335.00 Mhz - 410.00 Mhz. Using the sequence of the F- key
and the Mhz - key you now shift into the 800 Mhz range. Coverage here is
from 810.00 - 990 Mhz.
The only problem is that I have not been able to receive anything in the
upper two bands. If anyone has performed the above mod and had successful
results of reception in the upper two bands would you please contact me
and let me know what I still need to do.
*************** SQ9NRF *****************
* op : Pawel *
* tel : 503903082 *
* email: sq9nrf@poczta.fm *
* BBS : SQ9NRF@SR9BKA.#KAT.POL.EU *
* *
*************** VY 73! *****************
Read previous mail | Read next mail
| 
