| |
PA2AGA > TCPDIG 28.07.96 03:48l 158 Lines 5693 Bytes #-10938 (0) @ EU
BID : TCP_96_156
Read: GUEST
Subj: TCP-Group Digest 96/156
Path: DB0AAB<DB0KCP<DB0ZKA<DB0LX<DB0RBS<DB0SEL<DB0ZDF<DB0AIS<DB0IZ<DB0QS<
DB0ACC<DB0SM<PI8DAZ<PI8GCB<PI8MBQ<PI8VNW
Sent: 960727/2143Z @:PI8VNW.#ZH2.NLD.EU #:37112 [Hoek v Holland] FBB5.15c
From: PA2AGA@PI8VNW.#ZH2.NLD.EU
To : TCPDIG@EU
Received: from pa2aga by pi1hvh with SMTP
id AA14355 ; Sat, 27 Jul 96 21:20:07 UTC
Received: from pa2aga by pa2aga (NET/Mac 2.3.60/7.1) with SMTP
id AA00001734 ; Sat, 27 Jul 96 22:54:01 MET
Received: from pa2aga-1 by pa2aga with SMTP
id AA00001719 ; Sat, 27 Jul 96 22:49:37 MET
Received: from pa2aga-1 by pa2aga-1 (NET/Mac 2.3.60/7.5.3) with SMTP
id AA00007616 ; Sat, 27 Jul 96 22:49:35 MET
Date: Sat, 27 Jul 96 22:37:07 MET
Message-Id: <tcp_96_156>
From: pa2aga
To: tcp_broadcast@pa2aga-1
Subject: TCP-Group Digest 96/156
X-BBS-Msg-Type: B
TCP-Group Digest Sat, 27 Jul 96 Volume 96 : Issue 156
Today's Topics:
Dataradio TM96B on packet???
SCC-INTACK
unsubscribe
Send Replies or notes for publication to: <TCP-Group@UCSD.Edu>.
Subscription requests to <TCP-Group-REQUEST@UCSD.Edu>.
Problems you can't solve otherwise to brian@ucsd.edu.
Archives of past issues of the TCP-Group Digest are available
(by FTP only) from ftp.UCSD.Edu in directory "mailarchives".
We trust that readers are intelligent enough to realize that all text
herein consists of personal comments and does not represent the official
policies or positions of any party. Your mileage may vary. So there.
----------------------------------------------------------------------
Date: Sat, 27 Jul 1996 00:19:42 +0100 (BST)
From: Mike Dent <mike@unixphf.ampr.org>
Subject: Dataradio TM96B on packet???
I have a pair of Dataradio TM96B's I would like to get working as a 9600 baud
packet link, preferably using Linux.
Is anybody using units like these on packet. They are a commercial unit,
radio and modem all in one. With 9 pin D type and BNC connector on the rear.
They operate near to the 70cm's band at present, single channel.
Thanks in advance,
Mike
--
"I remember when NOS was NET and all you got was "Welcome to TTY-link.." "
Mike Dent. G6PHF. Morecambe, Lancs. UK.| BBSnet=G6PHF@GB7MBB.#16.GBR.EU
AMPRnet=g6phf@gb7mbb.ampr.org | INTERnet=mike@lurpac.lancs.ac.uk
WWW=http://www.lurpac.lancs.ac.uk/g6phf/g6phf.html | BayBBS +44 (0)1524
833222
------------------------------
Date: Fri, 26 Jul 96 11:11:48 MET
From: PA3GCU%PA3GCU@pa2aga.tno.nl
Subject: SCC-INTACK
> Date: Tue, 23 Jul 1996 09:24:28 +-200
> From: Pizzichetti Pasquale <spvgw1@ux4.glt.esercito.it>
> Subject: Driver SCC e INTACK method
> Driver SCC e INTACK method
> Hi everyone,
> I am interested in operating SCC cards like PC100 very much. I am conscious
of
> the fact that there are cards like Ottawa PI2 which would give me improved
> performance due to its better hardware design.
> But despite of this I think the SCC driver is more suitable for more general
> use, such as full-duplex communications, external clock from modem, and so
on,
> and so I prefere this one for now.
> So I am trying to get the best result with generic SCC driver, and therefore
> I would use the INTACK method.
> Unfortunally I am not able to succed with that while using PC100 card like.
GCU> I think thats understandable, considering the driver you are trying
GCU> is in my opinion the incorrect one.
> The attach command I use with JNOS in Polled mode is :
> attach scc 1 init 204 4 2 0 1 0 5 p|}15200
> and thus it is ok. While with INTACK mode I use :
> attach scc 1 init 204 4 2 0 1 208 5 p4915200
> but the PC100 cards does not function at all ! However I tried also INTACK
> address 209, 20A, 20B, 20C with the same bad result.
> Now, after I read the notes in the SCC source code file SCC.C about proper
> hardware design of the SCC card to support INTACK method, I wonder if
> the PC100 card is fit to !
GCU> This is a common problem thesedays, there are so many "Sorts" of
GCU> scc cards, many of these do not work in the same maner.
GCU> What i think you need is another driver for the pc100.
GCU> The scc driver included in *nos is the pe1chl for pa0hzp design
GCU> compatables. Maybe someone might know a trick to get it to work with
GCU> this driver, if not there is the pc100 driver which you can compile
GCU> into jnos, but its, as far as i know only for ax25.
GCU> I dont use jnos anymore, maybe its not included in recent versions,
GCU> this you will have to explore yourself. The following extract was
GCU> taken from the origanal documentation from pa0gri-nos version(s).
GCU> _________________________________________________________________
GCU> attach pc100 <ioaddress> <vector> ax25 <interface> <bufsize>
GCU> <speed>
GCU> ______________________________________________________________
GCU> Driver for the PACCOMM PC-100 (Zilog 8530) card. Only AX.25
GCU> operation is supported.
GCU> Or maybe even tfpcx would do the job,??? (just an idea).
> If not, what exactly is missing to PC100 card to realize a INTACK method
> driven compatible card?
> Is there anyone that can help me ?
> Thanks in advance.
GCU> Hope this helps. Regards Richard, 73. PA3GCU.
> Bye from Lino ik3ngu@dist.dist.unige.it
------------------------------
Date: Fri, 26 Jul 1996 15:57:34 -0400 (EDT)
From: Tony Griggs <griggst@q.continuum.net>
Subject: unsubscribe
unsubscribe griggst@q.continuum.net
------------------------------
End of TCP-Group Digest V96 #156
******************************
You can send your message for this bulletin
to: tcp-group@pa2aga on .AMPR.ORG-net
or: tcpaga@pi8vnw.#zh2.nld.eu on BBS-net
------
NOT TO: pa2aga@pa2aga or pa2aga@pi8vnw.#zh2.nld.eu PLEASE!!
It will get posted automatically within a few days
Read previous mail | Read next mail
| |
