| |
ZL3AI > APRS 13.10.00 03:42l 192 Lines 8083 Bytes #999 (0) @ WW
BID : 33935_ZL3AI
Read: GUEST
Subj: TAPR Digest, Oct 10, 7/8
Path: DB0MRW<DB0PV<DB0AAB<DB0KFB<DB0CZ<DB0GE<LX0PAC<LX0HST<HA3PG<VE1DRG<
N1UAN<N8ZFM<ZL2TZE<ZL2TZE<ZL2WA<ZL2BAU<ZL3VML
Sent: 001011/1245Z @:ZL3VML.#80.NZL.OC #:43122 [Chch-NZ] FBB7.00g25 $:33935_ZL3
From: ZL3AI@ZL3VML.#80.NZL.OC
To : APRS@WW
I would be interested in the logs for this if someone has them,
but this is what I did, and happened best I could tell..
The first 8 mins of the pass I was running high power from my d700
compensating for doppler as well as I guessed. I do not think I hit the sat
more than 1 or twice.. (this is a vhf quarterwave btw) I switched to 1200
baud on uplink and bam... every time.. I reduced power to mid then
eventually down to low power on mobile and best I could tell I digi-ed
myself almost every time.. (I was watching 1200 baud so I could only tell
by the response ack time from sat..) My conclusion is as someone noted
previous, the link budget does not seem to be the major issue at 9600, as
by these numbers should be about 100% (at full power) also taking into
account erp increase and snr decrease offsetting each other about equal...,
but it looks like there may be other variables, doppler ( I was moving
about 70 mph +_) and / or modem incompatibility...
I can provide more specifics if needed, and I am interested in seeing if
logs bear out my observations and are available.The beacon time was .2
mins.. aos to los...
I only saw the sunsat-3 beacon on downlink at 9600 while in that
mode... sorry for not catching anyone else...
Doug Bade KB8GVQ
>The Kirsteins wrote:
>
> > Hi Last night I left my D7g on in the car and I picked up the
> > following stations:SUNSAT-3KB8GVQ-8 TM-D700 In ServiceN3ZLL-9
> > TM-D700 In Service n3zll@amsat.org Did anyone receive
> > VA3DMK-15?
> > Thanks .... 73
> > Dave Kirstein VA3DMK
----------------------------------------------------------------------
Subject: Inputting to Garmin GPS
From: Red <RedHaines@centurytel.net>
Date: Tue, 10 Oct 2000 21:19:02 -0500
X-Message-Number: 46
MacGPS Pro, available from Larry James Associates, lwjames@teal.csn.net,
communicates both directions with some Garmins. Among other things, it
will input waypoints and routes into the Garmin. This firm, and others
may also publish applications for other computers and their operating
systems to do the same. Ask Dr. James via e-mail.
73 de Red, WO=D8W
----------------------------------------------------------------------
Subject: Sensor Frequencies / Locators
From: Ken Mirabella <kjm@flo-bin.com>
Date: Tue, 10 Oct 2000 18:53:35 -0700
X-Message-Number: 47
OK, I've got a weird onr too!
How about the frequency and the theroery behind the "jail at home" program.
Where a prisioner is confined to his house and he has an anckle braclet that
transmits a frequency. If he goes outside of a geographic area it sounds an
alarm.
How does it work? GPS? Lat/ long encoding???
ken, KM6YH
----------------------------------------------------------------------
Subject: Re: Inputting to Garmin GPS
From: Earl Needham <KD5XB@AMSAT.ORG>
Date: Tue, 10 Oct 2000 20:37:45 -0600
X-Message-Number: 48
At 09:19 PM 10/10/00 -0500, Red blasted the following out into the ether:
>MacGPS Pro, available from Larry James Associates, lwjames@teal.csn.net,
>communicates both directions with some Garmins. Among other things, it
>will input waypoints and routes into the Garmin.
Will it take data off 144.39 and re-format it for the Garmin so that
APRS stations show up as waypoints? Which is what a lot of us want...
Earl
Earl Needham, KD5XB mailto:KD5XB@AMSAT.ORG
Clovis, New Mexico DM84jk N34d 25.446m W103d 12.700m (or so)
Pet peeve: breath is a noun, breathe is a verb (When you take a breath,
you breathe...)
----------------------------------------------------------------------
Subject: Re: Looking for inexpensive APRS tracker
From: Mark Fellhauer <sparkfel@primenet.com>
Date: Tue, 10 Oct 2000 22:46:44 -0500
X-Message-Number: 49
-----------------------------------------------------------
At 08:32 PM 10/10/00, Smith, Tim wrote:
>Let's see...Garmin close-out Tripmates at $50, Tiny Tracker at $25, 2AT for
>$25, $10 for a mag mount quarter wave...comes out to a $110 tracker. Of
>course it's not plug and play but requires some mods of the Tripmate,
>assembly of the Tiny Tracker and so on...but it is CHEAP!
------------------------------------------------------------
One of the best pieces of advice I've ever been given by anyone was by one
of my college professors, who taught accounting after a long and successful
career providing financial expertise for a number of large corporations.
"Don't make your decisions, business or personal, in the margins."
it's even better than
"Son, don't try to make a station out of an HT."
Cheap - yes. Inexpensive - NO. From my unscientific tests I have found
that going from five watts with an HT to a 15 watt mobile quadruples the
number of successful digipeats in a typical RF environment. This is based
on 4.5 years of running an autotracker across the US and maintaining an
APRS digi for the last two years. In Sioux Falls, 5 watts gives you about
a 5 mile radius from the digi (before the tower blew over) with lots of
dead spots. Simple math states Area of a circle = pi times the square of
the radius or 3.14 x (5x5) or 3.14 x 25 or 78 square miles of
coverage. I have found going to 15 watts increases the coverage circle to
about an 18 mile radius. This amounts to 3.14 x (18x18) or 1017 square miles.
Divide $110 by 78 square miles and you get an average cost of $1.41 per
square mile of coverage.
My original SIMPLE TO SETUP solution - $320 for Alinco DR-135TP + $75 RM
GPS + $20 mag mount antenna (I upgraded) = $415
$415 divided by 1017 square miles gives you $.041 or 41 cents per square
mile of coverage.
Going with something more reasonable:
Used Kenwood TM-211 (25 watt) $90 + KPC-3Plus (HRO price new) $160 + RM
GPS $75 + Antenna $20 = $345
$345 divided by 1017 square miles = 34 cents per square mile of coverage
Of course this makes a number of assumptions, such as a non-mountaintop
digipeater. YMMV. But based on a statistical average of getting a signal
to a digipeater the lowest monetary cost solution is actually the most
expensive.
The other problem with the $110 solution is again, you're going to have to
source those parts. Finding $25 HT's is not an everyday occurance. I
have found that for the most part that when someone asks $25 for an HT,
there is a reason for it and it's usually not good. Last Hamfest I was at
(a week ago) someone had the NERVE to be asking $150 (firm) for a used
DJ-190. Now that's chutzpah!
Furthermore it violates the SIMPLE part of the equation. The originator of
this thread asked for a SIMPLE and low cost solution.
While you may consider building this $110 tracker simple. The average new
person to APRS or ham radio may not. In fact as APRS grows in popularity,
the percentage of people with the confidence level to do this actually
declines. Here's what your asking someone to do:
Modify a Tripmate GPS (even though for $25 more he can buy something he
doesn't have to modify). Then he has to solder 25 or 30 discrete
components to a TinyTrak circuit board. Then he has to tweak that circuit
board and configure it with an external program loaded from an external
PC. When he's done with that, he then has to figure out how to build a
custom keying cable for his HT (which has no documentation - and the keying
circuit found on the web is wrong) and connect the wires from that to the
TinyTrak, and then connect the GPS to the TinyTrack. Assuming he's
soldered everything right and has it configured correctly, he now has a 5
watt dumb tracker. Woo hoo! And how long did this take?
And then the dissapointment sets in. How come I can't hit the digi 9 miles
from here? Can I plug this laptop in and see other people on this
setup? What? I have to spend more money to do that?
I have also noted that the more you jerry rig something the more
opportunities that device has to break, so you spend half your time
tracking down broken wires, resoldering connections and the like. It's
Read previous mail | Read next mail
| |