| |
ZL3AI > APRS 13.10.00 03:40l 225 Lines 7660 Bytes #999 (0) @ WW
BID : 33901_ZL3AI
Read: GUEST
Subj: TAPR Digest, Oct 09, 1/6
Path: DB0MRW<DB0PV<DB0AAB<DB0KFB<DB0CZ<DB0GE<LX0PAC<LX0HST<HA3PG<VE1DRG<
N1UAN<N8ZFM<ZL2TZE<ZL2TZE<ZL2WA<ZL2BAU<ZL3VML
Sent: 001010/1106Z @:ZL3VML.#80.NZL.OC #:43030 [Chch-NZ] FBB7.00g25 $:33901_ZL3
From: ZL3AI@ZL3VML.#80.NZL.OC
To : APRS@WW
TAPR APRS Special Interest Group Digest for Monday, October 09, 2000.
1. Re: WinAPRS Registration
2. Re: CueCat Scanner working with APRS
3. Re: CueCat Scanner working with APRS
4. Re: Windshield attenuation
5. Re: CueCat Scanner working with APRS
6. Re: Windshield attenuation
7. RE: Tracking SUNSAT
8. Re: CueCat Scanner working with APRS
9. FS: 2m Radio, Tiny Tracker & TNCs
10. Re: [amsat-bb] Satellite Newbee thoughts
11. FM Satellite Summary (October)
12. Re: CueCat Scanner working with APRS
13. Small keyboard for Citadels
14. Re: CueCat Scanner working with APRS
15. Re: Hoping for aprs satelltie success
16. Re: CueCat Scanner working with APRS
17. Re: CueCat Scanner working with APRS
18. KPC3+ Owners
19. Looking for inexpensive APRS tracker
20. Re: KPC3+ Owners
21. Re: KPC3+ Owners
22. Re: KPC3+ Owners
23. APRS in Indiana Mailing List
24. Firmware updates from Garmin
25. Re: KPC3+ Owners
26. Re: KPC3+ Owners
27. Re: Firetalk
28. SUNSAT 10:19 pass/SM7WDL
29. RE: FM Satellite Summary (October)
30. Re:25+ Gas and Hot Air Balloons on APRS!
31. Re: Looking for inexpensive APRS tracker
32. Last Day/Nite For SUNSAT ?
----------------------------------------------------------------------
Subject: Re: WinAPRS Registration
From: Hamish Moffatt <hamish@cloud.net.au>
Date: Mon, 9 Oct 2000 19:31:15 +1100
X-Message-Number: 1
On Mon, Feb 07, 2000 at 11:59:50PM -0500, Travis J. Maclay wrote:
> Does anyone know if Keith Sproul's email address has changed? I have sent a
> couple emails about re-registration of my copy of WinAPRS and have not
> gotten a reply. I'm sure he is busy, just wanted to make sure I still had a
> current address for him.
>
> Thanks to anyone who can verify if kb2ici@amsat.org is still correct.
Please fix the date on your clock Travis!
Cheers
Hamish
--
Hamish Moffatt VK3SB <hamish@debian.org> <hamish@cloud.net.au>
----------------------------------------------------------------------
Subject: Re: CueCat Scanner working with APRS
From: "David D" <brozgrimm@hotmail.com>
Date: Mon, 09 Oct 2000 12:13:06 GMT
X-Message-Number: 2
Trapping the CR/LF may not be all that difficult if the keyboard
signals are converted to serial. I've found a link that uses a
Motorola microcontroller to do just that, but I've not tried it yet-
I'm not sure if it will take the full speed output of the scanner,
since the project was designed to take input from a keyboard
with a person typing.
http://www.beyondlogic.org/keyboard/keybrd.htm#1
--david
_________________________________________________________________________
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com.
Share information about yourself, create your own public profile at
http://profiles.msn.com.
----------------------------------------------------------------------
Subject: Re: CueCat Scanner working with APRS
From: K3for@aol.com
Date: Mon, 09 Oct 2000 08:59:05 EDT
X-Message-Number: 3
>>Trapping the CR/LF may not be all that difficult if the keyboard signals are
converted to serial.
1) The CueCat output is in scan codes, since the CueCat resides between the
keyboard and the motherboard.
2) We're looking for how to make the CueCat hardware inhibit the appended
CR/LF, so everybody with a 10-minute-modified CueCat
and APRSdos can go keyboard-less. Most of these scanners are built modular,
with configuration stored in the EEPROM and/or opt
ions toggle-able via applying/removing TTL to various system board points - but
the manufacturers (of course) won't tell you wh
ich/what. Our goal is to find the EEPROM-external solution, because few folks
are going to want to buy and wire a 68HC705J1A j
ust to do this.
However, keep the ideas/help rolling in. I think we're close to the solution.
Skip/K3FOR
----------------------------------------------------------------------
Subject: Re: Windshield attenuation
From: "Mike Yetsko" <myetsko@insydesw.com>
Date: Mon, 9 Oct 2000 09:03:48 -0400
X-Message-Number: 4
> I can tell you from a radar gun point of view, that the new cars
> are not any more stealthy to CW or Spread Spectrum radars :-)
>
> > A number of times the topic of through the glass antennas has
> > come up in other forums with regard to antennas not working
> > well on vehicles with various metal impregnated glasses, like
> > the 'titanium glass' GM puts on the Luminas.
It's not a question of 'stealth'. In fact, little or no 'reflection' for
enforcement purposes comes from the windshield area, other
than scatter off the trim or occasionally the rear view mirror.
There have been stealthy cars built, but not intentionally by the
manufacuters. If you want to see a REALLY good article on
that topic, that was covered in 1980 by Car and Driver.
September issue I think. They limited their testing to the Kustom
Signals KR-11 handgun, which at the time was the 'top of the
line' for K-band radar enforcement.
But back to HAM...
There's really two issues here. One is the dielectric of the glass
when used as a capacitor for through the glass antenna, and the
other is the 'transmisivness' to RF. BOTH of which are very
detrimentally affected by the new high efficiency 'metalic' glasses.
Mike
----------------------------------------------------------------------
Subject: Re: CueCat Scanner working with APRS
From: Hamish Moffatt <hamish@cloud.net.au>
Date: Tue, 10 Oct 2000 00:05:49 +1100
X-Message-Number: 5
On Mon, Oct 09, 2000 at 08:59:05AM -0400, K3for@aol.com wrote:
> 2) We're looking for how to make the CueCat hardware inhibit the appended
CR/LF, so everybody with a 10-minute-modified CueCa
t and APRSdos can go keyboard-less. Most of these scanners are built modular,
with configuration stored in the EEPROM and/or o
ptions toggle-able via applying/removing TTL to various system board points -
but the manufacturers (of course) won't tell you
which/what. Our goal is to find the EEPROM-external solution, because few
folks are going to want to buy and wire a 68HC705J1A
just to do this.
>
> However, keep the ideas/help rolling in. I think we're close to the solution.
Why not just modify the PC software?
Hamish
--
Hamish Moffatt VK3SB <hamish@debian.org> <hamish@cloud.net.au>
----------------------------------------------------------------------
Subject: Re: Windshield attenuation
From: Ken Brown <W2KB@compuserve.com>
Date: Mon, 9 Oct 2000 10:05:31 -0400
X-Message-Number: 6
>> Well, a while back, Car and Driver did an article on how these same
glasses in windshields really killed radar detector <<
They also severely attenuate EZPass electronic toll payment transponders,=
that are usually mounted on the inside of the windshield, somewhere where=
the rearview mirror blocks the forward view. The EZPass website lists a
number of vehicles that require an outside mounted tags. That would
probably be a good starting point to identify vehicles with this issue.
73,
---Ken W2KB@ARRL.net
----------------------------------------------------------------------
Subject: RE: Tracking SUNSAT
From: Bob Bruninga <bruninga@nadn.navy.mil>
Date: Mon, 9 Oct 2000 10:31:16 -0400 (EDT)
X-Message-Number: 7
On Mon, 9 Oct 2000, Andrew Davidson wrote:
> I found a program called APRStrak on the TAPR/sat ftp site, however when I
> run it it doesn't seem to refer to D7 tnc settings...
No, That was for the many APRS<=>MIR experiments back in 1995. It is
obsolete and not Y2K compliant.
The program that auto-tunes the D7 and D700 is APRStk and can be found:
ftp://tapr.org/aprssig/dosstuff/APRSdos/aprs848.zip
ftp://tapr.org/aprssig/dosstuff/APRSdos/aprs-exe.zip
Read previous mail | Read next mail
| |