| |
ZL3AI > APRDIG 08.08.03 09:10l 97 Lines 2881 Bytes #999 (0) @ WW
BID : 1747-ZL3AI
Read: GUEST
Subj: TAPR Digest, Aug 05, 2/2
Path: DB0FHN<DB0RGB<DB0MRW<OK0PKL<OK0PPL<DB0RES<ON0AR<VK6HGR<ZL2BAU<ZL3VML
Sent: 030807/1326Z @:ZL3VML.#80.NZL.OC #:6136 [Chch-NZ] FBB7.00i $:1747-ZL3AI
From: ZL3AI@ZL3VML.#80.NZL.OC
To : APRDIG@WW
Subject: Is it possible to install TAPR firmware on a TNC2X
From: "Van Cauwenberghe Sébastien" <svancau71@hotmail.com>
Date: Tue, 5 Aug 2003 16:3:0
X-Message-Number: 9
Hello,
I've got a TNC2X from baycom but if works with a TF erpom
is it possible to use this TNC with a new eprom with TAPR's firmware??
because I'd like to use this tnc with APRS/CE.
This program doesn't support TF host mode.
Thanks
Sébastien ON1SEB
----------------------------------------------------------------------
Subject: GPS source for track following and turn indication
From: "Darryl Smith" <Darryl@radio-active.net.au>
Date: Wed, 6 Aug 2003 07:03:26 +1000
X-Message-Number: 10
People
Does anyone know of any GPS software available in source code that will
allow me to record a route, and then follow it later, with some type of
prompts - like turn left in 100m?
Many thanks
Darryl
---------
Darryl Smith, VK2TDS POBox 169 Ingleburn NSW 2565 Australia
Mobile Number 0412 929 634 [+61 4 12 929 634 International]
Darryl@radio-active.net.au | www.radio-active.net.au
----------------------------------------------------------------------
Subject: wxsvr outlook statement posits
From: "Sean \\The RIMBoy\\" <sean@rimboy.com>
Date: Tue, 5 Aug 2003 15:47:21 -0500 (CDT)
X-Message-Number: 11
I was wondering if anyone knew what determines the posit for an outlook
statement:
http://www.findu.com/cgi-bin/find.cgi?call=OHX_OUTLK
In our case, OHX_OUTLK statements are always posit'd at this position. Is
this position determined by NWS, the wxsvr software, or something else? I
can see where this might be the center of the OHX coverage area, which if
that's the case that's fine. We're just curious to know if it's something
automatically determined or something that posit'd data to that position
from the NWS (either as a default (wxsvr) or from NWS).
Note, this is *NOT* the location of the OHX NWS office. It is located at:
http://www.findu.com/cgi-bin/find.cgi?call=K4OHX
Approx 23 miles away.
Thanks,
Sean...
--
Believing I had supernatural powers, I slammed into a brick wall.
--Paul Simon
_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
KG4NRC http://www.rimboy.com Your source for the crap you know you need.
----------------------------------------------------------------------
Subject: APRS AX.25 Packet Size
From: Adi Linden <adil@adis.on.ca>
Date: Tue, 5 Aug 2003 21:58:18 -0500 (CDT)
X-Message-Number: 12
What is the maximum packet size for a APRS AX.25 packet? Just wondering
how large to make a data buffer to store packets to be received or
transmitted.
Adi
--
Adi Linden | va3adi | va3adi@adis.ca | http://adis.ca
+-----------------------------------------------------------------+
IRLP Node 2590 in Sioux Lookout, Ontario
---
END OF DIGEST
Read previous mail | Read next mail
| |
