OpenBCM V1.13 (Linux)

Packet Radio Mailbox

DB0FHN

[JN59NK Nuernberg]

 Login: GUEST





  
ZL3AI  > APRS     12.10.00 17:15l 180 Lines 7231 Bytes #999 (0) @ WW
BID : 24230ZL3AI
Read: GUEST
Subj: TAPR Digest, Oct 07, 6/6
Path: DB0MRW<DB0BOX<DB0ABH<DB0RGB<OK0PPL<OK0PHL<OK0PBB<OK0PAB<HA5OB<HA3PG<
      RZ6HWL<IK5BCU<RZ6HW<RA9XF<LU2HJA<ZL2TZE<ZL2TZE<ZL2WA<ZL2BAU<ZL3VML
Sent: 001008/1132Z @:ZL3VML.#80.NZL.OC #:42760 [Chch-NZ] FBB7.00g25 $:33858_ZL3

(at least that's what I'm told).   Why anybody would write a piece of 
software this way is beyond me.    I won't even go into the programming 
bugs I encountered running WinOrbit.   It's about on par with the other 
Windows software I've encountered, too much fluff (aka feature creep), 
cumbersome user interface, and buggy.

My advice to the novice satellite tracker.  Use STS Orbit Plus.  It's easy 
to setup, easy to import keps, and it will run acceptably on a 386 PC, I've 
even run it on a 286, but slowly.  I put a math co-processor on the 286 and 
then it was actaully faster than a 386!  It prints out tabular data in 
local times and does everything a beginning satellite tracker needs.  It 
even shows what passes will have visible orbits.

73,

Mark
KC7BXS

BTW, if anyone can point me to a useful, Windows-based, satellite tracking 
program, that doesn't cost $75 or more, I'd be interested in taking a look 
at it.





----------------------------------------------------------------------

Subject: KISS Command to Read from TNC-attached GPS?
From: Steve Bragg <ka9mva@qsl.net>
Date: Sat, 07 Oct 2000 22:58:55 -0500
X-Message-Number: 23

Guys,

As some of you know, I'm playing with adding TNC-like functions to the HamHUD. 
Somebody said (this is how I understand it, not their words) that there was a
KISS command byte that causes a KISS TNC with GPS input to return a GPS
sentence.  They said it was a CTRL-E ($05 hex), which I can't understand because
that's the FullDuplex command in KISS-speak.  So:

- What is, if any, the command to cause the TNC to return the GPS data as a
packet?
- Is there a reference for this protocol anywhere (Web would be great)?

73,

Steve Bragg KA9MVA
-- 
--- __ __ ___   ____  __  ____    _____ 
   / //_//   | / __ \/  |/  / |  / /   |
  / ,<  / /| |/ /_/ / /|_/ /| | / / /| |
 / /| |/ ___ |\__, / /  / / | |/ / ___ |
/_/ |_/_/  |_/____/_/  /_/  |___/_/  |_|
======================================================
Steve Bragg KA9MVA    ka9mva@qsl.net   ICQ:29816109
HamHUD APRS Mobile Terminal: www.qsl.net/ka9mva/hamhud
Owasso, Oklahoma, USA
Owasso Amateur Radio Club www.qsl.net/oarc
FINDU, FIND ME WITH APRS! http://map.findu.com/ka9mva-9

----------------------------------------------------------------------

Subject: WinAPRS Registration
From: "Travis J. Maclay" <travis@btea.org>
Date: Mon, 7 Feb 2000 23:59:50 -0500
X-Message-Number: 24

Does anyone know if Keith Sproul's email address has changed?  I have sent a
couple emails about re-registration of my copy of WinAPRS and have not
gotten a reply.  I'm sure he is busy, just wanted to make sure I still had a
current address for him.

Thanks to anyone who can verify if kb2ici@amsat.org is still correct.

Thanks!


----------------------------------------------------------------------

Subject: Re: KISS Command to Read from TNC-attached GPS?
From: "Jeff Brenton" <jeffb@espi.com>
Date: Sat, 7 Oct 2000 23:11:31 -0500
X-Message-Number: 25

> KISS command for GPS

Unfortunately, at least for PacComm and Kantronics TNCs, that isn't true.
When you switch to KISS mode, ALL other features, including the second
serial ports on both brands, disappear.

Jeff Brenton
President,
Engineered Software Products, Inc
http://espi.com
Questionable web page: http://dididahdahdidit.com

The FTC's top 12 reported email scams are listed at:
http://www.ftc.gov/bcp/conline/pubs/alerts/doznalrt.htm


----------------------------------------------------------------------

Subject: Windshield attenuation
From: blitz <blitz@macronet.net>
Date: Sun, 08 Oct 2000 00:16:58 -0400
X-Message-Number: 26

Hi Mike et all,
This is a hot topic that appears from time to time in the ham and LMR
Sig's. There appears to be a number of windshield configurations that are
problematic in this respect. I personally have had probs with 87 T'birds,
and some Dodge's and I've read of any number of other combos in both
Chrysler and Ford products that seem to be culprit in attenuation probs.
For whatever reason, "I" have not encountered probs with any GM
equipment.(results may vary..obviously the Lumina is GM)

First off, lets not get the horse before the cart...bad installation of an
on-glass antenna can make any piece of glass as transparent as lead. On-
glass antennas are crap, simple enough. They're a poor solution to a vexing
problem, and they're poor most of the time because of installation problems
more than by design. They're designed for a single thickness of nb glass,
and any variation will spell problems, simple enough. The best on-glass
gain antenna I've used can't hold a candle to a roof mounted quarter wave.
That may sound wrong, but that's my observation. (and I'm sticking to it..)
A thicker than normal, non-blocking or (nb) for purposes of this
discussion, piece of glass exhibits problems similar to high attenuation
(ha) glass. The pieces comprising the capacitive part of the thru-glass
coupling are farther apart and exhibiting less than optimal capacity, and
unless you have the older Antenna Specialist models with the little tweak
screw to compensate, You are screwed. I ran into this on heavy equipment,
fork-lifts, Mack trucks and huge coal-digging equipment used in coal pits
some years ago. They wouldn't pass 450, let alone cellular. Customer was
livid, solution was to use no-groundplane antennas on mirrors (before you
ask).

Installation around resistive windshield defrosters is always a problem.
Endeavor to make as little of the elements fall under the footprint of the
on-glass antenna foot. Personal preference is to put the two small wires
near the outside of the footprint pad, rather that center a wire in the
middle of the pad. That's me, and its worked best for me that way before I
get flamed for that. (Someone will always have a better way and insist that
its the only way of course).
The combination of a rear-window defrogger and ha glass is almost always
fatal, no way, no can do. Had them up, on, and working, and the guy drove
down the street under a cell site, and complained of picket-fence. Ripped
it out.

In summary, I avoid them at all cost. When they have to be used, I prefer a
rear window, or a side, non-tinted window at all costs. Side windows are
usually high-temper glass, without the internal plastic sheet, which is
where a lot of metals/tints/metallics are appearing these days.
Manufacturers should be paying attention to this as more and more cars are
being equipped these days with everything from cell phones to
spy-in-the-sky satellite surveillance systems. (On Star comes to mind)
There is no reason we have to use metals in the glass anymore, there are
ample ways to tint and anti-glare glass without putting in things at block RF.
A piece of glass should exhibit a flat, low attenuation from 100mhz to 25
ghz. Its easily done, just leave the crap out of the glass, and concentrate
on organic and non-metalic tint methods. 

Good luck on all your installs.



At 12:58 10/7/00 -0400, you wrote:
>A number of times the topic of through the glass antennas has 
>come up in other forums with regard to antennas not working
>well on vehicles with various metal impregnated glasses, like 
>the 'titanium glass' GM puts on the Luminas.




---

END OF DIGEST




Read previous mail | Read next mail


 17.11.2026 16:17:59lGo back Go up