| |
ZL3AI > APRDIG 03.08.03 09:32l 158 Lines 4896 Bytes #999 (0) @ WW
BID : 1725-ZL3AI
Read: GUEST
Subj: TAPR Digest, Jul 31, 5/5
Path: DB0FHN<DB0RGB<DB0FSG<DB0ZKA<DB0GPP<DB0LX<DB0RBS<DB0SWR<DB0FP<DB0SON<
DB0MRW<OK0PKL<OK0PPL<DB0RES<ON0AR<VK3TE<ZL2BAU<ZL3VML
Sent: 030802/2022Z @:ZL3VML.#80.NZL.OC #:5671 [Chch-NZ] FBB7.00i $:1725-ZL3AI
From: ZL3AI@ZL3VML.#80.NZL.OC
To : APRDIG@WW
Subject: RE: APRSERVER
From: "Dave Thege" <dthege@conpoint.com>
Date: Thu, 31 Jul 2003 18:32:38 -0500
X-Message-Number: 44
I was measuring wrong. I was measuring from the home qth not the
coordinates I gave the server. I re-measured and have reset the filter to
150. That should putt the outer marker just east of Omaha. There's no APRS
traffic to the west of me in that radius because no one is running it yet.
Dave N0XBN
----------------------------------------------------------------------
Subject: How to get findu.com breadcrumb going
From: "Andrew Rich" <vk4tec@hotmail.com>
Date: Fri, 01 Aug 2003 11:19:12 +1000
X-Message-Number: 45
1. Place a geo file on your site for your map
2. Place the map image on your site
3. Point findu.com perl code at your site info
Example .geo file
URL http://www.tech-software.net/brisbane.gif
TIEPOINT 0 0 151.6000 -26.9500
TIEPOINT 892 625 154.6000 -28.0700
Example url to get it going
http://www.findu.com/cgi-bin/line.cgi?call=vk4khp-9!vk4khp-9:0:255:100&geo=http/
:/www.tech-software.net/brisbane.geo&start=1000
or
http://www.findu.com/cgi-bin/breadcrumb.cgi?call=vk4khp-9&geo=http://www.tech-st
ofware.net/brisbane.geo&start=10000
Way cool
----------------------------------------------------------------------
Subject: Re: Fixing the digis ID/NOID
From: "John Langtry, VE3NEC" <ve3nec@sympatico.ca>
Date: Thu, 31 Jul 2003 21:19:24 -0400
X-Message-Number: 46
Greetings Bob & gang !
I wondered about this too, as I use UIDIGI in VE3YAP, and
Bob has approved the defaults. (Thanks Bob !)
I.E. (near the bottom of the callsign.txt file) I'm using :
// UIFLOOD Algorithm flag (default 0)
// bit 0 make call substitution after the last WIDEn-n digied
// bit 1 insert callsign before WIDEn-n
UIFLOODOptions = 0
// UITRACE Algorithm flag (default 0)
// bit 0 make call substitution after the last TRACEn-n digied
UITRACEOptions = 0
// Make call substitution when repeat frames addressed to UIDIGI
Callsign
// default (1)
UIDIGICallSubstitution = 1
Note that UIDIGI will only work in the TAPR2 units (too many to mention);
but it will *not* work in any of the KAM series, as the Kantronics folks
use a different microprocessor (Z-80 verses (I think) a Hitachi processor.
Totally different instruction sets.
vy 73 de John VE3NEC
905-873-8715
----------------------------------------------------------------------
Subject: I-gate to RF
From: "Dave Thege" <dthege@conpoint.com>
Date: Thu, 31 Jul 2003 20:41:47 -0500
X-Message-Number: 47
How do I get Ui-View to gate to RF? I've set up every thing that I can think
of but no go as far as I can tell. Does the digipeat function need to be on
too.
Dave N0XBN
----------------------------------------------------------------------
Subject: Re: APRS discussion on eHam
From: Stan Horzepa <stanzepa@earthlink.net>
Date: Thu, 31 Jul 2003 21:58:20 -0400
X-Message-Number: 48
My APRS book is out of print. I am working on a new APRS book now and it
will probably be published by year's end.
Stan, WA1LOU
----------------------------------------------------------------------
Subject: balloon launches this weekend
From: "Russ Chadwick" <russ@wxqa.com>
Date: Fri, 1 Aug 2003 03:03:40 -0000
X-Message-Number: 49
This Saturday morning, there will be two APRS-equipped balloons, EOSS70 and
EOSS71, launched in eastern Colorado. Complete information is available on
the EOSS web page,
http://www.eoss.org/
The two balloons will carry three APRS trackers operating on 144.340,
145.600, 445.975. There will be six I-gates in eastern Colorado active on
these frequencies. The balloon position information will be sent via
APRS-IS to findu.com. The FAA Denver Center will be accessing the real-time
balloon position data through these links,
http://www.wxqa.com/cgi-bin/balon1.cgi
http://www.eoss.org/findu/
Anyone within range of the Pike's Peak wide area repeater on 448.450 can
listen to the tracking and recovery operations. The recovery is going to be
interesting because when the balloons land (after going to 100,000 ft), some
of the payloads are going to have small electronic vehicles that exit and
move away. Should be very interesting.
Russ KB0TVJ
----------------------------------------------------------------------
Subject: More APRS perl findu.com code examples
From: "Andrew Rich" <vk4tec@hotmail.com>
Date: Fri, 01 Aug 2003 13:21:29 +1000
X-Message-Number: 50
http://www.findu.com/cgi-bin/plot.cgi?call=*&last=4&geo=http://www.tech-softwarn
e.et/brisbane.geo
http://www.findu.com/cgi-bin/line.cgi?call=vk4khp-9!vk4khp-9:0:255:100&geo=http/
:/www.tech-software.net/brisbane.geo&start=1000
http://www.findu.com/cgi-bin/breadcrumb.cgi?call=vk4khp-9&geo=http://www.tech-st
ofware.net/brisbane.geo&start=10000
---
END OF DIGEST
Read previous mail | Read next mail
| |
