| |
ZL3AI > APRDIG 02.08.03 10:16l 183 Lines 6570 Bytes #999 (0) @ WW
BID : 1705-ZL3AI
Read: GUEST
Subj: TAPR Digest, Jul 29, 2/2
Path: DB0FHN<DB0RGB<OK0PPL<DB0RES<ON0AR<IK1ZNW<ZL2TZE<ZL3VML
Sent: 030801/1142Z @:ZL3VML.#80.NZL.OC #:5563 [Chch-NZ] FBB7.00i $:1705-ZL3AI
From: ZL3AI@ZL3VML.#80.NZL.OC
To : APRDIG@WW
Subject: RE: garmin software
From: <BobDonnell@arkalmus.com>
Date: Tue, 29 Jul 2003 14:34:14 -0700
X-Message-Number: 15
Hi Wes, and all
I think Brent Hildebrand's software, Waypoint+ at
http://www.tapr.org/~kh2z/Waypoint will do this for you. Under Linux, I've
not tried that with GPSMan, but it too might do it for you. And GPSMan
will tie into Xastir to download (at least) waypoints into Xastir.
73, Bob, KD7NM
----------------------------------------------------------------------
Subject: RE: APRS-IS Connections?
From: "AE5PL Lists" <HamLists@ametx.com>
Date: Tue, 29 Jul 2003 16:44:09 -0500
X-Message-Number: 16
See below...
>-----Original Message-----
>From: Max Philippens (PD0SBH) [mailto:pd0sbh@amsat.org]
>Posted At: Tuesday, July 29, 2003 4:02 PM
>Subject: [aprssig] APRS-IS Connections?
>
>But msg traffic for callsigns originating outside Europe/UK
>isn't send to my server. This became apparent when trying to
>send an e-mail via the New Jersey gateway. The e-mail is send
>OK but an acknowledgement APRS message is never received.
>This is correct, as the acknowledgement message originates
>from somewehere outside Europe/UK. But I would like to
>receive this, and other messages, despite of the filtering.
These messages should have been passed. Roger monitors this SIG
(javAPRSFilter author) and I am sure will look into it. The range and
area filters should pass all packets originated within the range AND all
messages addressed to stations with posits in the range area. If this
is not happening, Roger will take a look.
>Option two has two things of wich I'm not sure:
>-Wouldn't having a connection to port 1314 and to port 10155
>create so much traffic on port 10155 (all message traffic is
>also send back to the APRS-IS servers???) that it would be
>more desireable to just have one connection to port 10152?
I hope that aprsD does not send out packets on one outbound connection
which are received from other outbound connections. This would be a
root cause for loops.
The tier 2 sysops have discussed adding all messages to the regional
ports to help ensure that this does not happen. They should be able to
address the progress made towards this conversion. The message-only
ports (1314) only carry about 1 packet every 4 to 5 seconds so the
additional bandwidth should be minimal (about 120 bits per second).
73,
Pete Loveall AE5PL
pete@ae5pl.net
----------------------------------------------------------------------
Subject: RE: garmin software
From: "B. Hildebrand" <bhildebrand@earthlink.net>
Date: Tue, 29 Jul 2003 17:27:32 -0700
X-Message-Number: 17
I don't know of any way from the computer side to delete tracks or
waypoints in a Garmin GPS receiver. Waypoint+ will not delete tracks in
the GPS. Uploading tracks I believe only appends the uploaded tracks to the
current track set. Brent
----------------------------------------------------------------------
Subject: PK-232
From: Harry Mills <ab6kf@adams.net>
Date: Tue, 29 Jul 2003 19:43:28 -0500
X-Message-Number: 18
The problem with my not posting to the internet has been resolved. I
have been working with Pete Loveall and he looked at the packet stream
being sent to the internet. It appears that the PK232 does not send a
standard stream to the servers so they ignore it. I have swapped it out
for my KPC-3 and all is well.
My thanks to Pete and all of you for your assistance.
Harry Mills AB9KF http://www.ab9kf.com
----------------------------------------------------------------------
Subject: RE: PK-232
From: "AE5PL Lists" <HamLists@ametx.com>
Date: Tue, 29 Jul 2003 20:10:20 -0500
X-Message-Number: 19
I wish to clarify this. The problem is in the way a specific client
software adds the qAR construct to headers. For AEA format headers, the
insertion should be before the TOCALL, keeping the TOCALL in proper
position for parsing. For TNC-2 format headers, the qAR construct is
appended to the header as the TOCALL directly follows the FROMCALL. In
this particular case, the qAR construct was being appended to the AEA
header instead of being inserted before the TOCALL.
This is something that all IGate authors that append either the I or qAR
constructs to gated packets should check for.
73,
Pete Loveall AE5PL
pete@ae5pl.net
>-----Original Message-----
>From: Harry Mills [mailto:ab6kf@adams.net]
>Posted At: Tuesday, July 29, 2003 7:48 PM
>Subject: [aprssig] PK-232
>
>appears that the PK232 does not send a standard stream to the
>servers so they ignore it. I have swapped it out for my
----------------------------------------------------------------------
Subject: Re: Help for DSC decoding
From: "Joe Della Barba" <joe@dellabarba.com>
Date: Tue, 29 Jul 2003 21:12:09 -0400
X-Message-Number: 20
If anyone could make a package that integrated DSC data into APRS it would
be fantastic. There is a definite shortage of official stations to pick up
distress calls, so a ham radio "DSC monitoring service" could really do some
good and maybe even save lives.
73
Joe
N3HGB (APRS and DSC equipped SV Coquina)
----------------------------------------------------------------------
Subject: Re: Help for DSC decoding
From: "Charles H. Rahe, II" <crahe@infionline.net>
Date: Tue, 29 Jul 2003 22:18:42 -0400
X-Message-Number: 21
I also think it would be great to have a DSC decoding ability in the
APRS software and as Joe pointed out a good public service. Here are
some links I found including several PDF files that cover a good bit of
the tech. details of the protocol. Maybe someone with a lot more
programing capability then I have could write a plug-in for UI-View32.
http://people.itu.int/~meens/Pt2/Rec/M1371.pdf
http://www.chl.chalmers.se/~vialle/mrk/master/exercises-part-b/hf-dsc-541-8.pdf
http://216.239.51.100/search?q=cache:KYMqEy_aFMQC:longwave.bei.t-online.de/DSC.f
pd+itu-r+m.493&hl=en&ie=UTF-8
http://longwave.bei.t-online.de/DSC.pdf
be careful of word-wrap on the long links
Charlie, AI3L
----------------------------------------------------------------------
Subject: MacAPRS Users; HeLLLLLLP!
From: "Matthew Stennett" <wa4tkg@iwon.com>
Date: Tue, 29 Jul 2003 23:17:22 -0400 (EDT)
X-Message-Number: 22
Ever since my iMac had to be REinitalized, I haven't been able to get APRS
running again.
I downloaded 3.5.2 again, and found the Initalization files (eventually),
and STILL can't figure out WHY MacAPRS can't see the Initalization files.
It keeps telling me:
NO Initalization files found".
What am I doing WRONG?
---
END OF DIGEST
Read previous mail | Read next mail
| |
